UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☑  ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2021

or

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ________ to ___________

Commission File Number: 000-56004

ONDAS HOLDINGS INC.

(Exact name of registrant as specified in its charter)

411 Waverley Oaks Road, Suite 114, Waltham, MA 02452

(Address of principal executive offices) (Zip Code)

(888) 350-9994

(Registrant’s telephone number)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☑

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐No ☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☑ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☑ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☑

The aggregate market value of the common stock held by non-affiliates of the registrant as of June 30, 2021 (the last business day of the registrant’s most recently completed second fiscal quarter) was approximately $206,986,796. For purposes of this computation, all officers, directors, and 10% beneficial owners of the registrant are deemed to be affiliates. Such determination should not be deemed to be an admission that such officers, directors, or 10% beneficial owners are, in fact, affiliates of the registrant.

The number of shares outstanding of the issuer’s common stock as of March 22, 2022 was 40,990,604.

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

From time to time we make statements concerning our expectations, beliefs, plans, objectives, goals, strategies, future events or performance and underlying assumptions and other statements that are not historical facts. These statements are “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Actual results may differ materially from those expressed or implied by these statements. Forward-looking statements may appear throughout this report, including without limitation, the following sections: Item 1 “Business,” Item 1A “Risk Factors,” and Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations. “Forward-looking statements generally can be identified by words such as “anticipates,” “believes,” “estimates,” “expects,” “intends,” “plans,” “predicts,” “projects,” “will be,” “will continue,” “will likely result,” and similar expressions. These forward-looking statements are based on current expectations and assumptions that are subject to risks and uncertainties, which could cause our actual results to differ materially from those reflected in the forward-looking statements. Factors that could cause or contribute to such differences include those discussed in this Annual Report on Form 10-K, and in particular, the risks discussed under the caption “Risk Factors” in Item 1A and those discussed in other documents we file with the Securities and Exchange Commission (SEC). We undertake no obligation to revise or publicly release the results of any revision to these forward-looking statements, except as required by law. Given these risks and uncertainties, readers are cautioned not to place undue reliance on such forward looking statements.

We caution you that assumptions, beliefs, expectations, intentions, and projections about future events may and often do vary materially from actual results. Therefore, we cannot assure you that actual results will not differ materially from those expressed or implied by our forward-looking statements. A summary of some of the factors that could cause actual results to differ from those expressed or implied by our forward-looking statements, including forward-looking statements contained in this Annual Report on Form 10-K, is provided below under “Risk Factor Summary.” These factors should not be construed as exhaustive and should be read in conjunction with the other cautionary statements that are included in this Annual Report on Form 10-K and our other filings with the SEC. Should one or more of these risks or uncertainties materialize, or should any of our assumptions prove incorrect, our actual results may vary in material respects from those projected in these forward-looking statements. Factors or events that could cause our actual results to differ may emerge from time to time, and it is not possible for us to predict all of them. Our forward-looking statements do not reflect the potential impact of any future acquisitions, mergers, dispositions, joint ventures, investments, or other strategic transactions we may make. You should not place undue reliance on our forward-looking statements.

Each forward-looking statement speaks only as of the date of the particular statement, and we undertake no obligation to update or revise any forward-looking statements whether as a result of new information, future developments or otherwise, except as required by law.

Risk Factor Summary

Our business is subject to a number of risks and uncertainties, including those highlighted in the section titled “Item 1A. Risk Factors” in this Annual Report on Form 10-K. Some of these principal risks include the following:

Risks Related to Our Business and Industry

Risks Related to Regulatory Requirements  

Risks Related to our Intellectual Property

Risks Related to our Financial Results

Risks Related to the American Robotics Acquisition

Risks Related to our Common Stock

Item 1. Business.

This business description should be read in conjunction with our audited consolidated financial statements and accompanying notes thereto appearing elsewhere in this Annual Report on Form 10-K for the year ended December 31, 2021 (the “Form 10-K”), which are incorporated herein by this reference.

The use of the words “we,” “our,” the “Company” and “Ondas Holdings” in this Form 10-K refer to Ondas Holdings Inc. and its subsidiaries.

Corporate Overview

Ondas Holdings Inc. is a leading provider of private wireless, drone, and automated data solutions through its wholly owned subsidiaries Ondas Networks Inc. (“Ondas Networks”) and American Robotics, Inc. (“American Robotics” or “AR”). Ondas Networks and American Robotics together provide users in rail, energy, mining, agriculture, and critical infrastructure markets with improved connectivity, data collection capabilities, and automated decision-making to improve operations. We operate our two subsidiaries as separate business segments. See Notes 1 and 2 of the accompanying Consolidated Financial Statements for further information regarding our segments.

Ondas Networks

Ondas Networks provides wireless connectivity solutions enabling mission-critical Industrial Internet applications and services. We refer to these applications as the Mission-Critical Internet of Things (“MC-IoT”). Our wireless networking products are applicable to a wide range of MC-IoT applications, which are most often located at the very edge of large industrial networks. These applications require secure, real-time connectivity with the ability to process large amounts of data at the edge of large industrial networks. Such applications are required in all of the major critical infrastructure markets, including rail, electric grids, drones, oil and gas, and public safety, homeland security and government, where secure, reliable and fast operational decisions are required in order to improve efficiency and ensure a high degree of safety and security.

We design, develop, manufacture, sell and support FullMAX, our patented, Software Defined Radio (“SDR”) platform for secure, licensed, private, wide-area broadband networks. Our customers install FullMAX systems in order to upgrade and expand their legacy wide-area network infrastructure. Our MC-IoT intellectual property has been adopted by the Institute of Electrical and Electronics Engineers (“IEEE”), the leading worldwide standards body in data networking protocols, and forms the core of the IEEE 802.16s standard. Because standards-based communications solutions are preferred by our mission-critical customers and ecosystem partners, we have taken a leadership position in IEEE as it relates to wireless networking for industrial markets. As such, management believes this standards-based approach supports the adoption of our technology across a burgeoning ecosystem of global partners and end markets.

Our software-based FullMAX platform is an important and timely upgrade solution for privately-owned and operated wireless wide-area networks, leveraging Internet Protocol-based communications to provide more reliability and data capacity for our mission-critical infrastructure customers. We believe industrial and critical infrastructure markets throughout the globe have reached an inflection point where legacy serial and analog based protocols and network transport systems no longer meet industry needs. In addition to offering enhanced data throughput, FullMAX is an intelligent networking platform enabling the adoption of sophisticated operating systems and equipment supporting next-generation MC-IoT applications over wide field areas. These new MC-IoT applications and related equipment require more processing power at the edge of large industrial networks and the efficient utilization of network capacity and scarce bandwidth resources which can be supported by the “Fog-computing” capability integrated in our end-to-end network platform. Fog-computing utilizes management software to enable edge compute processing and data and application prioritization in the field enabling our customers more reliable, real-time operating control of these new, intelligent MC-IoT equipment and applications at the edge.

American Robotics

American Robotics designs, develops and manufactures autonomous drone systems, providing high-fidelity, ultra-high-resolution aerial data to enterprise customers. We provide our customers turnkey data solutions designed to meet their unique requirements in the field. We do this via our internally developed Scout System™, an industrial drone platform which provides commercial and government customers with the ability to continuously digitize, analyze, and monitor their assets and field operations in near real-time.

The Scout System™ has been designed from the ground up as an end-to-end product capable of continuous unattended operations in the real world. Powered by innovations in robotics automation, machine vision, edge computing, and AI, the Scout System™ provides efficiencies as a drone solution for commercial use. Once installed in the field at customer locations, a fleet of connected Scout Systems remain indefinitely in an area of operation, automatically collecting data each day, self-charging, and seamlessly delivering data analysis regularly and reliably. AR markets the Scout System™ under a Robot-as-a-Service (“RaaS”) business model, whereby our drone platform aggregates customer data and provides the data analytics meeting customer requirements in return for an annual subscription fee.

The Scout System™ consists of (i) Scout™, a highly automated, AI-powered drone with advanced imaging payloads (ii) the ScoutBase^TM, a ruggedized weatherproof base station for housing, charging, data processing, and cloud transfer, and (iii) ScoutView^TM, a secure web portal and API which enables remote interaction with the system, data, and resulting analytics anywhere in the world. These major subsystems are connected via a host of supporting technologies. Using a suite of proprietary technologies, including Detect-and-Avoid (“DAA”) and other proprietary intelligent safety systems, we achieved the first and only Federal Aviation Administration (“FAA”) approval for automated operations without a human on-site in the United States on January 15, 2021. As a result, American Robotics currently has the unique ability to serve markets which require automated drone technology to enable scalable drone operations, which the Company estimates to be 90% of all commercial drone applications.

Partnership with Siemens

In April 2020, Ondas Networks entered into a strategic partnership with Siemens Mobility (“Siemens”), a worldwide leader in seamless, sustainable, reliable and secure transportation solutions for more than 160 years, to both market our FullMAX-based networking technology and services and to jointly develop wireless communications products for the North American Rail Industry based on Siemens’ Advanced Train Control System (“ATCS”) protocol and our FullMAX MC-IoT platform.

We believe Siemens has both the sales and marketing reach and support to drive our technology to wide scale acceptance across the global rail market beginning with the North American Class I Railroad market. In the third quarter of 2021 we completed the development of our first jointly-developed product with Siemens – the dual-mode ATCS/MC-IoT radio systems. Siemens is now marketing and selling these proprietary systems under the brand name Airlink to our railroad customers. The dual-mode ATCS radio systems support Siemens’ extensive installed base of ATCS radios as well as offer Siemens’ customers the ability to support a host of new advanced rail applications utilizing our MC-IoT wireless system. These new applications, including Advanced Grade Crossing Activation and Monitoring, Wayside Inspection, Railcar Monitoring and next generation signaling and train control systems, are designed to increase railroad productivity, reduce costs and improve safety. In addition, Siemens has begun to market and sell Ondas Networks’ standalone MC-IoT 802.16 products under the Siemens Airlink brand.

Our relationship with Siemens expanded significantly in 2021 both with (i) the wider marketing of our wireless technology platform and (ii) multiple additional joint-product programs. Siemens has expanded its marketing reach of Ondas Networks products with identified opportunities in North American Transit Rail as well as in European and Asian Rail markets. We believe our technology has broad potential in these large, newly targeted markets. Siemens and Ondas Networks began a second major joint development program in the first quarter of 2021 to deliver a new dual mode on-board locomotive radio combining FullMAX MC-IoT technology with Siemens’ Head-of-Train (“HOT”) system. This new development, initially focused on the North American Class 1 rail market, has now expanded to global markets including for the delivery of a dual mode MC-IoT/HOT radio to a major Asian rail customer. Additional joint-product development projects are expected in 2022 and beyond.

Our Strategy

Our goal is to be a global leader in providing turnkey data solutions for industrial, public safety and government markets by offering i) secure wireless connectivity solutions enabling high-bandwidth, mission-critical Industrial Internet applications and services through Ondas Networks and ii) automated industrial data services through American Robotics’ Scout System™.

The key elements of our growth strategy include the following:

Our Business Model

Ondas Networks

We sell our FullMAX MC-IoT wireless products and services globally through a direct sales force and value-added sales partners to industrial and critical infrastructure providers including major rail operators, commercial and industrial drone operators, electric and gas utilities, water and wastewater utilities, oil and gas producers and pipeline operators, and for other critical infrastructure applications in areas such as public safety, homeland security and defense, and transportation. We continue to develop our value-added reseller relationships which today include a strategic partnership with Siemens for the development of new types of wireless connectivity for the North American Rail. We believe our Siemens’ partnership is indicative of the potential for additional Tier 1 partnerships in our other vertical markets including securing reseller relationships with major suppliers to the worldwide government and homeland security markets.

In executing our go-to-market strategy, we intend to monetize our software-based intellectual property and grow revenue and cash flow with embedded FullMAX software sales, Software-as-a-Service (“SaaS”) arrangements, IP royalties based on Ondas Networks software and through additional services provided to customers and ecosystem partners. Customers deploy our connectivity and Fog-computing platform in private networks that designed for lifetimes of 10 – 15 years or even longer. Our FullMAX platform is software-defined and offers customers flexibility to expand capacity and evolve network utilization. Similarly, our ecosystem partners often integrate our FullMAX software and wireless capability into their own long-lived equipment and systems which their customers purchase and deploy. As such, we believe our software solutions provide ongoing revenue opportunities and sales models both related to both connectivity value and edge computing capability. Customers and ecosystem partners will require ongoing FullMAX system and security enhancements and for us to design additional features which create opportunities for additional, recurring revenue and profit streams. Our monetization strategies include:

Systems sales: Our FullMAX deployments are typically large, mission-critical wide-area networks deployed and privately operated by our industrial and government customers. These end-to-end system deployments involve sales consisting of both base stations and edge radio end points with embedded FullMAX software and network management software and tools.

Software and hardware maintenance agreements: Our customers contract with us for extended software and hardware maintenance which provide them with critical ongoing support for their installed network. These SaaS contracts provide revenue to us in the year following an initial installation. Software maintenance licenses entitle the customer to ongoing software and security upgrades as well as enabling the provision of additional system features. Similarly, hardware maintenance programs provide customers extended equipment warranty terms for an installed network. These SaaS maintenance arrangements allow our customers to continue to maintain a modern, flexible and upgradeable network over a long period of time. These agreements may extend for multiple years given the long average life of the installed and growing network.

Licensing / Royalties: In certain system deployments, our ecosystem partners will choose to embed FullMAX software into their own hardware and software platforms providing us with an ongoing per device multi-year revenue stream. Licensing is an effective way for an ecosystem partner to jumpstart customer activity. Alternatively, a partner may choose to develop software based on our intellectual property generating royalty revenue.

Other Services: We provide ancillary services directly related to the sale of our wireless communications products which include wireless network design, systems engineering, radio frequency planning, software configuration, product training, installation, and onsite support. Furthermore, we also provide engineering and product development services to ecosystem partners who are interested in integrating their intelligent equipment with our FullMAX SDR platform and need our expertise to do so.

American Robotics

American Robotics markets its Scout System™ drone platform via a direct sales force to industrial, agricultural and government customers. We focus on identifying and qualifying large, sophisticated customers with active drone programs who have the ability and intent to expand those programs and eventually deploy fleets of automated drones across their portfolio of assets. After initial customer qualification, contracting and the receipt of a purchase order, we ship and install the Scout System™ on the customer premises. Our field service personnel remain on location for a short period of time to ensure the programmed automated drone operations are meeting customer requirements.

By virtue of offering a truly automated data solution, American Robotics is able to structure its business under a Robot-as-a-Service (“RaaS”) model. The RaaS model bundles hardware, software, operations, and maintenance into one annual subscription fee. This business model results in a lower annual cost of data acquisition to a customer via the drone, to what AR believes is approximately ten times less than current manual methods which are labor intensive. Our RaaS business model also provides enhanced accuracy, consistency and completeness over human collection methods. In addition, it offers American Robotics recurring, software-like margins in return for these services. This model also presents the opportunity for continued software improvements, upgrades, and new features that can be monetized through tiered pricing and app store-like concepts, allowing for continued user experience improvement and potential increase in revenue per unit over time.

The RaaS business model offers many benefits for customers including:

Annual Subscription for Service: The Scout System is bundled into an annual subscription fee, encompassing the full suite of hardware, software, and services, allowing American Robotics to provide customers the highest performing product at the lowest possible cost.

Real-Time Automated Operation: Once installed, each Scout system operates at its maximum capacity. Automated missions occur multiple times per day, guaranteeing customers the highest quality data at the highest frequency.

Low Upfront Capital Costs: The Robot-as-a-Service (RaaS) model allows American Robotics to lower the burden of upfront manufacturing and hardware costs. Aside from initial installation, set up and shipping costs, all that a customer pays for is the service that the Scout System provides.

Limited Long-term Risk: Subscription fees are billed annually, and replacement units can be swapped out at the end of the service life. American Robotics will also periodically install new software updates and provide access to new features, assuring optimal performance throughout a customer’s subscription.

No Maintenance Responsibilities: Our staff remotely oversee the operation of customer units and manage routine and unscheduled maintenance requirements.

No Customer Pilot Training: Both the technology itself and our staff oversee the real-time operation of a customer’s units. Health status and performance are constantly monitored to assure optimal performance, and no pilot training is required for a customer’s staff to integrate this technology into their business.

Reduced Warranty Exposure: American Robotics owns and operates each Scout System™ unit. This reduces warranty exposure and customer friction. Non-performing units will be replaced, repaired, and validated at our expense.

Our Products and Services

Ondas Networks

Ondas Networks has developed a next-generation radio platform specifically to meet the evolving data needs of large industrial and government customers and markets.  These markets are differentiated from consumer markets in that the customers assets are dispersed over very wide and remote geographies with specific challenges to installation, maintenance, and upgrades.  These challenges led us to design a new type of software-based radio platform capable of supporting a long useful life to the network hardware.  Instead of using low cost, off the shelf, dedicated communications chipsets (“ASICs”), we selected powerful programmable embedded general-purpose processors, DSPs, and FPGAs, all of which are software upgradable. Our software defined radio (“SDR”) architecture, with more than 12 years in development and supported by a team of over 50 software engineers, allows us to customize almost any aspect of the air interface protocol, the key components of which are patented and have been incorporated into new IEEE wireless standards. The ability to constantly improve customer networks and hosted software applications with flexible, over-the-air software upgrade helps create customer loyalty and creates high switching costs.

Our FullMAX SDR platform is designed to enable highly secure and reliable industrial-grade connectivity for truly mission-critical applications. An end-to-end FullMAX network consists of connected wireless base stations, fixed and mobile edge radios and supporting technology all enabled by critical software developed and owned by Ondas Networks. The Fog-computing capability integrated in our end-to-end FullMAX SDR platform is valued by our customers and ecosystem partners as they seek to leverage the value of MC-IoT applications for improved safety, efficiency, and profitability. Our IEEE 802.16s compliant equipment is designed to optimize performance of unused or underutilized low frequency licensed radio spectrum and narrower channels. We do this through various patented software algorithms including via “spectrum harvesting” techniques which aggregate narrowband channels to create increased broadband network capacity. Our channel aggregation algorithms include the ability to aggregate hard to utilize, non-contiguous narrowband channels and are a hallmark feature of a FullMAX broadband system.

The critical software algorithms powering our end-to-end FullMAX wireless SDR platform and related Fog-computing architecture have been developed by and are owned by Ondas Networks. FullMAX is an intelligent networking system which integrates core network management systems with edge computing resources including computing hardware and MC-IoT software applications. In the MC-IoT Fog enabled by FullMAX, base stations are enabled with a highly configurable Quality of Service algorithms which coordinate the data traffic within the Fog for both the edge radio and the resident MC-IoT applications. The intelligent base stations control and manage all network resources including our edge remotes; dynamically allocating bandwidth, prioritizing data packets and managing edge applications. The intelligent software-managed base stations determine whether to process data at the edge, distribute data traffic across the Fog to other edge remote radios or to transport information to the corporate Cloud. Our Edge remotes have embedded compute capability and are able to host MC-IoT applications including those from third party vendors via virtualized software systems managed in docker / container architectures and can also manage data from intelligent equipment or sensor networks that interface with the edge remotes in the field. Our software-managed edge remotes offer security via authentication, multi-layer encryption and virtual software firewalls which are requirements for mission-critical data networks.

We are dedicated to promoting standards-based wireless connectivity solutions for our customers. Our FullMAX platform is compliant with the mission critical wireless Industrial Internet IEEE 802.16s. The specifications in the IEEE 802.16s standard are primarily based on our FullMAX technology, and many of our customers and industrial partners actively supported our technology during the IEEE standards-making process. In January 2020, a new working group was launched by the IEEE to establish IEEE 802.16t, a further evolution of this wireless standard. The IEEE 802.16t working group includes industry-leading trade organizations such as the Association of American Railroads (“AAR”), Transportation Technology Center, Inc. (“TTCI”), the Utilities Technology Council (UTC) and the Electric Power Research Institute (EPRI), as well as representation from world-leading transportation and oil and gas companies. We expect our technology to remain a prominent feature of this evolving standard.

American Robotics

American Robotics provides our customers with turnkey automated data solutions designed to meet their unique requirements in the field. We do this via our internally developed Scout System™, our autonomous drone platform which provides commercial and government customers with the ability to continuously digitize, monitor and analyze their assets in near real-time.

The Scout System™ has been designed from the ground up as an end-to-end product capable of continuous unattended operations in the real world. The Scout System™ consists of (i) Scout™ Drone, a highly automated, AI-powered drone with advanced imaging payloads (ii) the ScoutBase^TM, a ruggedized base station for housing, charging, data processing, and cloud transfer, and (iii) ScoutView^TM, American Robotics’ analytics and user interface software package, as well as a host of supporting technologies that connect these major subsystems. Using a suite of proprietary technologies, including DAA and other proprietary intelligent safety systems, American Robotics achieved the first and only approval for automated operations without a human on-site in the United States on January 15, 2021.

American Robotics’ Concept of Operations (CONOPS) was designed in concert with the end-to-end technology stack to optimize for FAA-approval of fully automated operation. The Company has developed a proprietary suite of layered, redundant technological risk mitigations and layered, redundant operational risk mitigations to achieve this industry-first FAA approval of continuous, automated, remote operations. The combination of AR’s technologies and the corresponding CONOPS enables a solution that is considered both uniquely safe and uniquely scalable, by taking piloting out of the hands of customers.

CONOPS Overview: A ScoutBase is installed at a fixed location within the desired Area of Operation (AO). Under AR’s current set of FAA approvals, a Scout drone is permitted to fly anywhere under 400 feet within a 2-mile radius of the ScoutBase and the accompanying ground-based DAA system. Once installed, no further physical human interaction is required to conduct daily operations. All pre-flight inspections, mission planning, flight, obstacle avoidance, air traffic avoidance, health diagnostics, and precision landing are conducted autonomously via our proprietary software. An American Robotics Remote Operator (RO) is located offsite in the Company’s Network Operations Center (NOC) and monitors the automated drone systems operations.

The Market for Our Products and Services

Ondas Networks

The global end markets for Ondas Networks’ MC-IoT wireless networking solutions are established, large, and we believe, poised to grow rapidly given the key role connectivity will play in next generation IoT-type applications. Firms like Cisco Systems, Inc. and Gartner, Inc. forecast billions of connected IoT devices installed throughout the economy; many of which are deployed for industrial applications. Dell’Oro Group, Inc. estimates that Wide Area IoT spending, including low power WAN deployments with which we compete, will reach $33.0 billion for carriers and infrastructure vendors by 2022, growing approximately 2.5X from 2017. In many of our industrial end markets, we believe the adoption of low-cost edge computing and increased penetration of “smart machinery” is driving demand for next-generation networks for IoT applications such as those powered by FullMAX. Demand for edge computing solutions is growing rapidly and adopting edge computing applications can help our customers run their businesses more efficiently, profitably, and safely. According to MarketsandMarkets the market for global edge computing solutions is expected to grow over 34% per year from $3.6 billion in 2020 to $15.7 billion by 2025. Ondas Networks is leveraging its industry expertise and FullMAX connectivity and Fog-computing platform to develop an enhanced range of products to capitalize on this expanding opportunity with the goal of becoming the leading supplier of private industrial networks.

We have targeted the North American freight rail operators for the initial adoption of our FullMAX platform. These rail operators currently operate antiquated legacy communications systems utilizing serial-based narrowband wireless technologies for voice and data communications. These legacy wireless networks have limited data capacity and are unable to support the adoption of new, intelligent train control and management systems. In addition to data capacity challenges, rail operators need to reliably cover the vast and often remotely located rail track and related infrastructure which extends nationwide. The rail operators require a next-generation, robust broadband system with significantly increased data throughput capacity and Fog networking capability. We believe a transition to integrated Fog-computing wireless communications systems will enable the rail operators to drive more intelligence to the edge of their operating environments enabling real time automation and better operator control of many critical operating systems related to train control, crossing safety, train and track integrity and drone operations. This upgrade cycle is being driven by a recent key event which occurred in August 2020 in which the Class 1 rail systems in the U.S. were awarded new nationwide “greenfield” wideband radio spectrum by the Federal Communications Committee (“FCC”). As part of the award, the rail operators are required by 2024, to vacate a series of legacy narrowband channels. The completion of this multiyear negotiation between the FCC and other licensed users is projected to generate a major network upgrade cycle for the rail industry which will support enhanced safety and improved efficiency and profitability of train operations.

The North American Rail Network is vast in scale, consisting of 140,000 miles of track, 25,000 locomotives, and 1.6 million railcars. Within this large footprint, we believe there are 200,000 highway crossings, with at least 65,000 of the crossings equipped with electronic systems today, a number which is expected to increase in the coming years. We believe a significant portion of the communications infrastructure has been in operation for more than 20 years and now requires a technological upgrade to support new applications and increased capacity requirements. Our FullMAX MC-IoT platform offers an excellent migration path for these applications. The Class I Railroads value the ability of our frequency-agnostic SDR architecture to enable a substantial data capacity increase utilizing the railroad’s existing wireless infrastructure and dedicated FCC licensed radio frequencies, as well as the flexibility to adapt to and take advantage of future changes in spectrum availability, as well as future business and operational requirements.

American Robotics

The total addressable market (“TAM”) for commercial drone applications is also large – measuring $127 billion according to a 2016 report from consulting firm PwC. For the vast majority of commercial drone applications, full automation is required to make economic sense. The time and cost requirements of human pilots are too high for the demanding and monotonous routines that must be performed to extract value.

American Robotics’ Scout System™ targets the majority of “drone-in-a-box”-applicable commercial and defense markets, as estimated by PwC. The commercial market is segmented into two primary categories, Agriculture and Industrial. AR estimates the collective TAM for the Scout System within these three target markets to be $114 billion. For each market, the core automation technology is the same, but the product is optimized for that set of use cases. Primary differences include payload as well as the user interface (“UI”) and user experience (“UX”) and analytics packages within ScoutView™.

Customer Activity

Ondas Networks

The majority of Ondas Networks customer activity has been with the Class 1 freight railroad operators and Siemens in North America. There are six Class I railroads in North America, all of which run multiple, frequency-specific networks for different applications. Our FullMAX platform has the flexibility to operate in all these frequency bands and will allow these customers the opportunity to better utilize their radio spectrum and add more high-value, data-intensive applications to their operations. Ondas Networks has completed multiple, ongoing testing and pilot programs with BNSF Railway and CSX Corporation, two North American Class I freight railroad operators in connection with the system validation performed on behalf of the Association of American Railroads’ (AAR) Wireless Communications Committee (WCC). Our initial focus with these rail customers has been for train control applications and related safety systems in the 900 MHz frequency band where the FCC has recently awarded our railroad customers new radio spectrum in connection with the Anterix 900 MHz Report and Order.

In November 2021, we received our first commercial order for the 900 MHz network from Siemens. We also received a purchase order in December 2021 to establish a Rail Lab (the “dot16 Rail Lab”) via Siemens on behalf of the AAR. The dot16 Rail Lab will host multiple Class 1 freight rail operators where they will perform on going network design and configuration related to optimizing the performance of our IEEE 802.16 complaint systems in connection with wide-scale field deployment. We expect the commercial rollout of the 900 MHz to accelerate with the Class 1 freight rail operators throughout 2022 with multiple rail customers providing purchase orders and deploying our software-defined network. We expect a 900 MHz network upgrade cycle across all Class I railroad systems over the next few years in order to comply with FCC license requirements and meet business needs related to safety and profitability.

American Robotics

American Robotics’ Scout System™ addresses a wide number of applications and use case across industrial, enterprise and government end markets. We believe strong demand for AR’s automated data solutions is reflected in a robust pipeline of potential customers which grew significantly following the FAA approval received in January 2021. American Robotics launched its commercial marketing effort in May 2021, after receiving an initial investment from Ondas Holdings. Marketing activity accelerated in August 2021 after the acquisition by Ondas Holdings which allowed for the further scaling of people and infrastructure to support customers in the field. American Robotics initial marketing activity is focused on the mining, oil & gas, rail and solar industries. In these markets we focus our attention on large, sophisticated and often blue-chip industrial customers with active drone programs and who have the ability and intent to deploy fleets of drones with a scalable solution such as the Scout System™. We refer to these customers as “Franchise Customers”.

In 2021, American Robotics announced purchase orders from Stockpile Reports and Conoco-Phillips and, in January 2022, a purchase order was received from Chevron Corporation. In addition, American Robotics is in the final procurement stage with a number of other industrial customers, with expected purchase orders and installations occurring throughout 2022. AR’s strategy is to deliver an exceptional service experience to these Franchise Customers in order to generate additional purchases of the Scout System™ for nationwide fleet deployments.

Manufacturing, Availability and Dependence upon Suppliers

Ondas Networks and American Robotics utilize outsourced manufacturing partners in building of product to fulfill customer orders. Utilizing contract manufacturers allows us to focus on designing, developing and selling our products. Furthermore, outsourced manufacturing allows us to leverage the economies of scale and expertise of specialized outsourced manufacturers, reduce manufacturing and supply chain risk and distribution costs.

Ondas Networks designs the printed circuit boards and enclosures for our radios and maintains the bill of materials for all of the products we manufacturer. A Bill of Materials (“BOM”) is a list of the raw materials, sub-assemblies, intermediate assemblies, sub-components, parts and the quantities of each needed to manufacture the end product. The physical manufacturing of FullMAX circuit boards is outsourced to best-in-class industrial contract manufacturers. The contract manufacturer is responsible for sourcing the majority of components in the BOM, assembling the components onto the printed circuit boards and then delivering the final boards to us. Once at our facility, the boards are tested, then placed into enclosures and programmed with the appropriate software. The radios are then configured according to the requirement of the network and run through system level tests before being packaged and shipped to the customer. Ondas Networks maintains multiple contract manufacturers, both domestically and internationally, to ensure competitive pricing and to reduce the risk from a single manufacturer.

American Robotics designs the Scout System™ and specifies all components of the BOM including the raw materials, sub-assemblies, intermediate assemblies, sub-components, parts and the quantities of each needed to manufacture the end product. These assemblies incorporate a combination of custom-developed components and COTS components. Our acoustics-based DAA sub-system is provided by a California-based supplier, and we retain the contractual right to manufacturer that DAA system ourselves. The building of a Scout System™ is outsourced to best-in-class contract manufacturers for fabrication and assembly. We utilize different contract manufacturers for the Scout™ Drone and Scout Base™. Once complete, the contract manufacturers deliver the finished products to our facility where software is loaded and system-level QA is performed before being packaged and shipped to the customer location for installation. American Robotics works with a select group of contract manufacturers and has access to a large number of other comparable contract manufacturers. 

Research & Development

Our ability to develop state-of-the-art and cost-effective solutions relative to our competitors can only be achieved through our continued research and development efforts.

Ondas Networks research and development activities are headed by Menashe Shahar, our Chief Technology Officer, based in our Sunnyvale, California headquarters. Mr. Shahar is a co-founder of the Company and has over 30 years of telecommunications system development experience, including the design and implementation of broadband wireless data systems for top tier system integrators and service providers including WorldCom, Nortel and ADC. Mr. Shahar has been awarded multiple patents in the data communications industry and has been an active participant in major wireless standardization activities including IEEE 802.16. In addition to internal research and development efforts, we also engage third party consultants to assist us in our research and development activities.

American Robotics research and development activities are headed by Vijay Somandepalli, Chief Technology Officer, based in our Waltham, MA headquarters. Dr. Somandepalli is a co-founder of American Robotics and has extensive experience in the fields of robotics, drones, energy storage, and aerospace engineering. Prior to founding American Robotics, Dr. Somandepalli was a Managing Engineer and senior consultant for over a decade at Exponent, a large national engineering and scientific consulting firm, where he advised in many industries, including oil & gas, solar, hydroelectric, coal, infrastructure, automotive, aviation, and telecom. Dr. Somandepalli holds a Ph.D. and Master’s in Mechanical Engineering from Stanford University, a B.Tech in Aerospace Engineering from the Indian Institute of Technology, Madras, and is a Licensed Professional Engineer (PE).

Our research and development team works closely with our customer support team and incorporates feedback from our customers into our product development plans to improve our products and address emerging market requirements.

Our research and development expenses were approximately $5,801,000 and approximately $3,587,000 for the years ended December 31, 2021 and 2020, respectively.

Intellectual Property

We rely primarily on patent, trademark and trade secret laws to protect our proprietary technologies and intellectual property. As of this filing, Ondas Networks held a total of 7 issued patents in the U.S., 3 pending patent applications in the U.S., and 13 international pending patent application.  Ondas Networks patents expire between 2030 and 2037, subject to any patent extensions that may be available for such patents. Our intellectual property centers around creating and maintaining robust, private, highly secure, broadband industrial wireless networks using our FullMAX radio technology for our mission critical customers’ networks. We view Ondas Networks patents as a key strategic advantage as the markets for industrial wireless connectivity grows and as these industries move to standardized solutions and will enable us to earn licensing fees and/or royalties for the use of our patents.

American Robotics relies primarily on patent, trademark and trade secret laws to protect our proprietary technologies and intellectual property. As of this filing, American Robotics held a total of 4 issued patents in the U.S., 6 pending patent applications in the U.S., and 6 international pending patent application. AR’s patents expire between 2036 and 2039, subject to any patent extensions that may be available for such patents. AR’s intellectual property incorporates internally developed software and hardware design incorporating machine and computer vision and was developed with artificial intelligence and machine learning techniques. This intellectual property is critical to the development of end-to-end systems which reliably enable the automated operation of drones in real-world environments,

We have a policy of requiring our officers, employees, contractors and other service providers and parties with which we do business to enter into confidentiality, non-disclosure (“NDAs”) and assignment of invention agreements before disclosure of any of our confidential or proprietary information.

Seasonality

We do not believe that the industry in which Ondas Networks competes is subject to seasonal sales fluctuation.

The industries in which American Robotics offers its automated data solutions is subject to some seasonal sales fluctuation, which differs by end markets and customer geographic locations. For example, weather and growing patterns means that demand from agricultural customers is typically greatest early in the growing season. Most industrial end markets are subject to much less seasonality.

Dependence on a Single Customer

Because we have only recently invested in our customer service and support organization, a small number of customers have accounted for a substantial amount of our revenue. During the year ended December 31, 2021, two customers accounted for approximately $1,204,000 and $1,599,000 of our revenue, or approximately 41% and 55%, respectively. During the year ended December 31, 2020, two customers accounted for approximately $1,012,000 and $1,005,000 of our revenue, or approximately 47%, and 46%, respectively.

Competition

Ondas Networks

We compete with alternatives to wireless technology, public cellular data networks and private wireless networking products from other manufactures. We believe that each of these competing solutions has core weaknesses when compared to FullMAX, as described below.

Public cellular data networks:

Other private wireless products:

Alternate technologies:

American Robotics

We compete with other drone OEMs providing a variety of solutions for inspection, security, asset tracking and other applications. We compete on many dimensions with system performance being differentiated by the level of autonomous operation, ease of use, reliability, safety, and government regulations. Further, leading automated data solution providers must provide diverse payload capabilities for data collection, along with robust, advanced analytics programs that are specific for each industry served.

None of our competitors offering automated UAS systems have secured FAA approval or waivers comparable to those received by American Robotics and are not able to operate at scale without human intervention when systems are deployed.

Governmental Regulations

Our operations are subject to various federal, state and local laws and regulations including:

We believe we have the licenses materially required to conduct our operations, and we are in substantial compliance with applicable regulatory requirements. The operation of our manufactured products by our customers (network providers and service providers) in the U.S. or in foreign jurisdictions in a manner not in compliance with local law could result in fines, business disruption, or harm to our reputation. The changes to regulatory and technological requirements may also alter our product offerings, impacting our market share and business.  Failure to comply with applicable regulations could result in substantial fines or revocation of our operating licenses or could give rise to termination or cancellation rights under our contracts or disqualify us from future bidding opportunities.

Environmental Regulation

Our operations are subject to extensive, and frequently changing, federal, state and local environmental laws and substantial related regulation by government agencies, including the Environmental Protection Agency. Among other matters, these regulatory authorities impose requirements that regulate the operation, handling, transportation and disposal of hazardous materials; protect the health and safety of workers; and require us to obtain and maintain licenses and permits in connection with our operations. This extensive regulatory framework imposes significant compliance burdens and risks on us. Notwithstanding these burdens, we believe that we are in material compliance with all federal, state and local environmental laws and regulations governing our operations.

There has been no material adverse effect to our consolidated financial statements nor competitive positions as a result of these environmental regulations.

Employees

As of March 18, 2022, we have 74 full-time employees, including 24 in the Ondas Networks segment and 50 in the American Robotics segment. In addition, we have consulting agreements with 10 consultants for manufacturing, supply chain, documentation, engineering, regulatory, IT, and business development support. Additionally, from time to time, we may hire temporary employees. We also utilize contractors to manufacture components, for certain research and development and for system deployment functions. None of our employees are covered by a collective bargaining agreement and we are unaware of any union organizing efforts. We consider our relationship with our employees to be good.

Corporate Information

Ondas Holdings Inc. was originally incorporated in Nevada on December 22, 2014, under the name Zev Ventures Incorporated. On September 28, 2018, we acquired Ondas Networks Inc., a Delaware corporation, changed our name to Ondas Holdings Inc., and discontinued the prior business of Zev Ventures Incorporated. On August 5, 2021, Ondas Holdings Inc. acquired American Robotics, Inc., a Delaware Corporation. See Note 1 of the accompanying Consolidated Financial Statements for further information regarding the American Robotics acquisition.

As a result of the acquisitions described above, Ondas Networks and American Robotics became our wholly owned subsidiaries. Also, we have one wholly owned subsidiary, FS Partners (Cayman) Limited, a Cayman Islands limited liability company, and one majority owned subsidiary, Full Spectrum Holding Limited, a Cayman Islands limited liability company. We are in the process of dissolving both FS Partners (Cayman) Limited and Full Spectrum Holding Limited.

Ondas Holdings’ corporate headquarters are located in Waltham, Massachusetts. Ondas Networks has offices and facilities in Sunnyvale, California, and American Robotics’ offices and facilities are located in Waltham, Massachusetts and Marlborough, Massachusetts.

Available Information 

Our Internet website is www.ondas.com. Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to reports filed or furnished pursuant to Sections 13(a) and 15(d) of the Securities and Exchange Act of 1934, as amended (the “Exchange Act”) are available, free of charge, under the Investors tab of our website as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC. Additionally, the SEC maintains a website located at www.sec.gov that contains the information we file or furnish electronically with the SEC.

Item 1A. Risk Factors

Investing in our common stock involves a high degree of risk. Before you invest in our common stock, you should carefully consider the following risks, as well as general economic and business risks, and all of the other information contained in this Form 10-K. Any of the following risks could harm our business, operating results and financial condition and cause the trading price of our common stock to decline, which would cause you to lose all or part of your investment. When determining whether to invest, you should also refer to the other information contained in this Form 10-K including our financial statements and the related notes thereto.

Risks Related to Our Business and Industry

We have incurred significant operating losses since inception and cannot assure you that we will ever achieve or sustain profitability.

Since our inception, we have incurred significant net losses. As of December 31, 2021 and December 31, 2020, we had an accumulated deficit of approximately $80 million and $65 million, respectively. To date, we have financed our operations primarily through sales of our equity securities and debt financings.

We expect our operating expenses to increase significantly as we pursue our growth strategy, including expending substantial resources for research, development and marketing. The extent of our future operating losses and the timing of profitability are highly uncertain, and we expect to continue incurring significant expenses and operating losses over the next several years. Any additional operating losses may have an adverse effect on our stockholders’ equity and the price of our common stock, and we cannot assure you that we will ever be able to achieve profitability.

Even if we achieve profitability, we may not be able to sustain or increase such profitability. Additionally, our costs may increase in future periods and we may expend substantial financial and other resources on, among things, sales and marketing, the hiring of additional officers, employees, contractors and other service providers, and general administration, which may include a significant increase in legal and accounting expenses related to public company compliance, continued compliance and various regulations applicable to our business or arising from the growth and maturity of our company. Our failure to become and remain profitable would depress the value of our company and could impair our ability to raise capital, expand our business, maintain our development efforts, obtain regulatory approvals, diversify our product and service offerings or continue our operations, and may cause the price of our common stock to decline.

The adoption of the IEEE 802.16s wireless broadband standard by customers in our target critical infrastructure sectors is uncertain.

The IEEE 802.16s wireless broadband standard was published in October 2017. In addition, we are currently the only manufacturer of IEEE 802.16s compliant equipment. The benefit of the standard to buyers of our equipment are greater when there exists a large, deep market in terms of the number of customers. A large market benefits from the scale provided such that many vendors can compete on service, price and quality of solution driving improved value for customers. If a large end market does not develop and customers do not see the related benefits from the standard, we may not be able to grow our business.

Our growth depends in part on the success of our strategic partnerships with third parties such as Siemens Mobility, who are also customers, as well as on our ability to establish a broad range of additional ecosystem partner and customer relationships with leading global industrial vendors.

In order to grow our business, we depend on partnerships with market leading technology and industrial companies such as Siemens Mobility, who are also customers of Ondas Networks in order to accelerate the adoption of our wireless technology. If we are unsuccessful in maintaining our partnership and customer relationships with third parties, including Siemens Mobility, or if our partnerships do not provide us the anticipated benefits, our ability to compete in the marketplace or to grow our revenue could be impaired and our operating results may suffer. In addition, adoption of our FullMAX wireless platform and Scout System™ requires us to establish additional ecosystem relationships with leading global industrial vendors and customers. Even if we are successful in executing these partnerships and integrating with additional ecosystem vendors, we cannot assure you that these partnerships and relationships will result in increased adoption of our technology or increased revenue.

If the commercial UAS markets do not experience significant growth, if we cannot expand our customer base or if our products and services do not achieve broad acceptance, then we may not be able to achieve our anticipated level of growth.

We cannot accurately predict the future growth rates or sizes of the markets for our products and services. Demand for our products and services may not increase, or may decrease, either generally or in specific markets, for particular types of products and services or during particular time periods. We believe the market for commercial UAS is nascent and the expansion of the market for our products and services in particular, depends on a number of factors, including the following:

Even if commercial UAS gain wide market acceptance, our products and services may not adequately address market requirements and may not continue to gain market acceptance. If these types of systems generally, or our products and services specifically, do not gain wide market acceptance, then we may not be able to achieve our anticipated level of growth and our revenue and results of operations would decline.

Negative customer perception regarding the commercial UAS industry or Company’s automated data solutions could have a material adverse effect on the demand for the Company’s products and the business, results of operations, financial condition and cash flows of the Company.

The Company believes the commercial UAS industry is highly dependent upon customer perception regarding the safety, efficacy, and quality of the commercial UAS system deployed. Customer perception of these products can be significantly influenced by scientific research or findings, regulatory investigations, litigation, media attention, and other publicity. There can be no assurance that future scientific research, findings, regulatory proceedings, litigation, media attention, or other research findings or publicity will be favorable to the UAS market. Future research reports, findings, regulatory proceedings, litigation, media attention or other publicity that are perceived as less favorable than, or that question, earlier research reports, findings or publicity could have a material adverse effect on the demand for the Company’s products and the business, results of operations, financial condition and cash flows of the Company. The dependence upon customer perceptions means that adverse scientific research reports, findings, regulatory proceedings, litigation, media attention or other publicity, whether or not accurate or with merit, could have a material adverse effect on the Company, the demand for the Company’s products, and the business, results of operations, financial condition and cash flows of the Company.

Failure to manage our planned growth could place a significant strain on our resources.

Our ability to successfully implement our business plan requires an effective plan for managing our future growth. We plan to increase the scope of our operations. Current and future expansion efforts will be expensive and may significantly strain our managerial and other resources and ability to manage working capital. To manage future growth effectively, we must manage expanded operations, integrate new personnel and maintain and enhance our financial and accounting systems and controls. If we do not manage growth properly, it could harm our business, financial condition or results of operations and make it difficult for us to satisfy our debt obligations.

We may be unsuccessful in achieving our organic growth strategies, which could limit our revenue growth or financial performance. Our ability to generate organic growth will be affected by our ability to, among other things:

Many of the factors affecting our ability to generate organic growth may be beyond our control, and we cannot be certain that our strategies for achieving internal growth will be attempted, realized or successful.

If we fail to retain our existing customers or do not acquire new customers in a cost-effective manner, our revenue may decrease and our business, financial condition or results of operations may be harmed.

We believe that our success is dependent on our ability to continue identifying and anticipating the needs of our customers, to retain our existing customers and to add new customers. For example, our business plan is designed to penetrate large, critical infrastructure end markets with our wireless and UAS driven data solutions and have expanded our dedicated sales resources and field personnel to broaden our marketing and field support efforts into new industries and sectors. As a result, we have significantly increased customer engagement in the transportation, security and UAS end markets with Ondas Networks and in the oil & gas and mining sectors with American Robotics. We expect that our qualified customer pipeline will increase in other additional strategic end markets. However, as we become larger through organic growth, the growth rates for customer engagement, project volume and average spend per customer may slow, even if we continue to add customers on an absolute basis. In addition, the costs associated with customer retention may be substantially lower than costs associated with the acquisition of new customers. Therefore, our failure to retain existing customers, even if such losses are offset by an increase in revenue resulting from the acquisition of new customers, could have an adverse effect on our business, financial condition or results of operations.

Additionally, while a key part of our business strategy is to add customers in our existing geographic markets, we expect to expand our operations into new geographic markets. In doing so, we may incur losses or otherwise fail to enter new markets successfully. Our expansion into new markets may place us in unfamiliar and competitive environments and involve various risks, including the need to invest significant resources and the possibility that returns on such investments will not be achieved for several years or at all. 

The Company faces uncertainty and adverse changes in the economy.

Adverse changes in the economy could negatively impact the Company’s business. Future economic distress may result in a decrease in demand for the Company’s products, which could have a material adverse impact on the Company’s operating results and financial condition. Uncertainty and adverse changes in the economy could also increase costs associated with developing and publishing products, increase the cost and decrease the availability of sources of financing, and increase the Company’s exposure to material losses from bad debts, any of which could have a material adverse impact on the financial condition and operating results of the Company.

Any outbreak or worsening of an outbreak of contagious diseases, or other adverse public health developments, could have a material and adverse effect on our business operations, financial condition and results of operations.

Any outbreak or worsening of an outbreak of contagious diseases, or other adverse public health developments, could have a material and adverse effect on our business operations, financial condition and results of operations. For example, in December 2019, a novel strain of coronavirus (“COVID-19”) was identified in Wuhan, China, and has subsequently spread to other regions of the world, and has resulted in increased travel restrictions, business disruptions and emergency quarantine measures across the world including the United States. The Company’s business, financial condition and results of operations were impacted from the COVID-19 pandemic during the year ended December 31, 2021 as follows:

The Company expects its business, financial condition and results of operations will be impacted from the COVID-19 pandemic during 2022, primarily due to supply chain disruptions due to pandemic-related plant and port shutdowns, transportation delays, government actions and other factors, which may be beyond our control. The global shortage of certain components such as semiconductor chips, strains on production or extraction of raw materials, cost inflation, and labor and equipment shortages, could escalate in future quarters. Labor shortages have led and may continue to lead to difficult conditions for hiring and retention of employees, and increased labor costs. Further, the COVID-19 pandemic is ongoing and remains an unknown risk for the foreseeable future. The extent to which the coronavirus may impact our business will depend on future developments, which are highly uncertain and cannot be predicted, including new information which may emerge concerning the severity of the coronavirus. As a result, the Company is unable to reasonably estimate the full extent of the impact from the COVID-19 pandemic on its future business, financial condition and results of operations. In addition, if the Company were to experience any new impact to its operations or incur additional unanticipated costs and expenses as a result of the COVID-19 pandemic, such operational delays and unanticipated costs and expenses there could be a further adverse impact on the Company’s business, financial condition and results of operations during 2021.

We have significant dependence on a small number of customers, and the loss of such customers or a decrease in business conducted with such customers could materially harm our business, financial condition or results of operations.

Because we have only recently invested in our customer service and support organization, a small number of customers have accounted for a substantial amount of our revenue. During the year ended December 31, 2021, two customers accounted for approximately $1,204,000 and $1,599,000 of our revenue, or approximately 41% and 55%, respectively. During the year ended December 31, 2020, two customers accounted for approximately $1,012,000 and $1,005,000 of our revenue, or approximately 47% and 46%, respectively. The loss of either of these 2021 customers or a decrease in the business conducted with such customers could have a material adverse impact on our business, financial condition or results of operations. 

 Project performance delays or difficulties, including those caused by third parties, or certain contractual obligations may result in additional costs to us, reductions in revenues or the payment of liquidated damages.

Many projects involve challenging engineering, construction or installation phases that may occur over extended time periods. We may encounter difficulties as a result of delays or changes in designs, engineering information or materials provided by our customer or a third party, delays or difficulties in equipment and material delivery, schedule changes, delays from our customer’s failure to timely obtain permits or meet other regulatory requirements including the securing of necessary FCC certifications or FAA approvals, weather-related delays and other factors, many of which are beyond our control, that impact our ability to complete the project in accordance with the original delivery schedule. In addition, we contract with third-party subcontractors to assist us with the completion of contracts. Any delay or failure by suppliers or by subcontractors in the completion of their portion of the project may be beyond our control and may result in delays in the overall progress of the project or may cause us to incur additional costs, or both. Delays and additional costs may be substantial, and, in some cases, we may be required to compensate the customer for such delays. Delays may also disrupt the final completion of our contracts as well as the corresponding recognition of revenues and expenses therefrom. In certain circumstances, we guarantee project completion by a scheduled acceptance date or achievement of certain acceptance and performance testing levels; failure to meet any of our guarantees, schedules or performance requirements could also result in additional costs or penalties to us, including obligations to pay liquidated damages, and such amounts could exceed expected project profit. In extreme cases, the above-mentioned factors could cause project cancellations, and we may be unable to replace such projects with similar projects or at all. Such delays or cancellations may impact our reputation, brand or relationships with customers, adversely affecting our ability to secure new contracts.

Our contractors may fail to satisfy their obligations to us or other parties, or we may be unable to maintain these relationships, either of which may have a material adverse effect on our business, financial condition and results of operations.

We depend on third party contractors to complete manufacturing, certain research and development and deployment functions. There is a risk that we may have disputes with contractors arising from, among other things, the quality and timeliness of work performed by the contractor, customer concerns about the contractor or our failure to extend existing task orders or issue new task orders. In addition, if any of our contractors fail to deliver on a timely basis the agreed-upon supplies and/or perform the agreed-upon services, then our ability to fulfill our obligations may be jeopardized. In addition, the absence of qualified contractors with whom we have a satisfactory relationship could adversely affect the quality of our service and our ability to perform under some of our contracts. Any of these factors may have a material adverse effect on our business, financial condition or results of operations.

Material delays or defaults in customer payments could leave us unable to cover expenditures related to such customer’s projects, including the payment of our subcontractors.

Because of the nature of most of our contracts, we commit resources to projects prior to receiving payments from our customers in amounts sufficient to cover expenditures as they are incurred. In certain cases, these expenditures include paying our contractors and purchasing parts. If a customer defaults in making its payments on a project or projects to which we have devoted significant resources, it could have a material adverse effect on our business, financial condition or results of operations.

Certain of our officers, employees, contractors and other service providers may work on projects that are inherently dangerous, and a failure to maintain a safe worksite could result in significant losses.

Certain of our project sites can place our officers, employees, contractors and other service providers and others, including third parties, in difficult or dangerous environments, and may involve difficult and hard to reach terrain, high elevation, or locations near large or complex equipment, moving vehicles, high voltage or other safety hazards or dangerous processes. Safety is a primary focus of our business and maintaining a good reputation for safety is critical to our business. Many of our customers require that we meet certain safety criteria to be eligible to bid on contracts. We maintain programs with the primary purpose of implementing effective health, safety and environmental procedures throughout our company. Maintaining such programs involves variable costs which may increase as governmental, regulatory and industry safety standards evolve, and any increase in such costs may materially affect or business, financial condition or results of operations. Further, if we fail to implement appropriate safety procedures or if our procedures fail, our officers, employees, contractors and other service providers, including third parties, may suffer injuries. Failure to comply with such procedures, client contracts or applicable regulations, or the occurrence of such injuries, could subject us to material losses and liability and may adversely impact our ability to obtain projects in the future or to hire and retain talented officers, employees, contractors and other services providers, therefore materially adversely affecting our business, financial condition or results of operations.

Warranty claims resulting from our services could have a material adverse effect on our business, financial condition or results of operations.

We generally warrant our manufactured products, including hardware and software, for a period of one year from the date of receipt of the product by the customer. After the first year, the customer can pay for extended hardware warranty and software maintenance and upgrades on an annual basis in advance. While costs that we have incurred historically under our warranty obligations have not been material, the costs associated with such warranties, including any warranty related legal proceedings, are variable and could have a material adverse effect on our business, financial condition or results of operations.

Our products are subject to a lengthy sales cycle and our customers may cancel or change their product plans after we have expended substantial time and resources in the design of their products.

Many of our customers are conservative in their decision-making process. Sales cycles for new customers can vary from one to three years depending on the complexity of the customer’s network, whether the customer is subject to state regulations, and annual budget cycles. During this lengthy sales cycle, our potential customers may cancel or change their product plans. Customers may also discontinue products incorporating our devices at any time or they may choose to replace our products with lower cost semiconductors. In addition, we are working with leading customers in our target markets to define our future products. If customers cancel, reduce or delay product orders from us, or choose not to release products that incorporate our devices after we have spent substantial time and resources developing products or assisting customers with their product design, our revenue levels may be less than anticipated and our business, results of operations and financial condition may be materially adversely affected.

Our marketing efforts depend significantly on our ability to receive positive references from our existing customers.

Our marketing efforts depend significantly on our ability to call on our current and past customers to provide positive references to new, potential customers. A material portion of our current pipeline activity is concentrated in the transportation and aviation sectors as well as the in oil & Gas and mining industries. Given our limited number of customers, the loss or dissatisfaction of any customer could substantially harm our brand and reputation, inhibit the market acceptance of our products and services, and impair our ability to attract new customers and maintain existing customers. Further, as we expand into new vertical and geographic end markets, references from existing customers could be similarly important. Any of these consequences could have a material adverse effect on our business, financial condition and results of operations.

If our products contain defects or otherwise fail to perform as expected, we could be liable for damages and incur unanticipated warranty, recall and other related expenses, our reputation could be damaged, we could lose market share and, as a result, our financial condition or results of operations could suffer.

Our products rely on complex avionics, sensors, user-friendly interfaces and tightly integrated, electromechanical designs to accomplish their missions. Our products may contain defects or experience failures due to any number of issues in design, materials, manufacture, deployment and/or use. If any of our products contain a defect, compatibility or interoperability issue or other error, we may have to devote significant time and resources to find and correct the issue. Such efforts could divert the attention of our management team and other relevant personnel from other important tasks. A product recall or a significant number of product returns could (i) be expensive; (ii) damage our reputation and relationships with utilities and other third-party vendors; (iii) result in the loss of business to competitors; and (iv) result in litigation against us. Costs associated with field replacement labor, hardware replacement, re-integration with third-party products, handling charges, correcting defects, errors and bugs, or other issues could be significant and could materially harm our financial results.

As a manufacturer of UAV products, and with aircraft and aviation sector companies under increased scrutiny, claims could be brought against us if use or misuse of one of our UAV products causes, or merely appears to have caused, personal injury or death. In addition, defects in our products may lead to other potential life, health and property risks. Any claims against us, regardless of their merit, could severely harm our financial condition, strain our management and other resources.

The existence of any defects, errors, or failures in our products or the misuse of our products could also lead to product liability claims or lawsuits against us. A defect, error or failure in one of our products could result in injury, death or property damage and significantly damage our reputation and support for our products in general. We anticipate this risk will grow as our products begin to be used in U.S. domestic airspace and urban areas.

Although we maintain insurance policies, we cannot provide assurance that this insurance will be adequate to protect us from all material judgments and expenses related to potential future claims or that these levels of insurance will be available in the future at economical prices or at all. A successful product liability claim could result in substantial cost to us. Even if we are fully insured as it relates to a claim, the claim could nevertheless diminish our brand and divert management’s attention and resources, which could have a negative impact on our business, financial condition and results of operations.

Estimated future product warranty claims are based on the expected number of field failures over the warranty commitment period, the term of the product warranty period, and the costs for repair, replacement and other associated costs. Our warranty obligations are affected by product failure rates, claims levels, material usage and product re-integration and handling costs.

Because our products are relatively new and we do not yet have the benefit of long-term experience observing products’ performance in the field, our estimates of a product’s lifespan and incidence of claims may be inaccurate. Should actual product failure rates, claims levels, material usage, product re-integration and handling costs, defects, errors, bugs or other issues differ from the original estimates, we could end up incurring materially higher warranty or recall expenses than we anticipate.

Our Scout System makes use of lithium-ion battery cells, which, if not appropriately managed and controlled, have occasionally been observed to catch fire or vent smoke and flames. If such events occur with our products, we could face liability associated with our warranty, for damage or injury, adverse publicity and a potential safety recall, any of which would adversely affect our business, prospects, financial condition and operating results.

The battery packs in our Scout Drone™ use lithium-ion cells, which have been used for years in laptop computers and cell phones. On occasion, if not appropriately managed and controlled, lithium-ion cells can rapidly release the energy they contain by venting smoke and flames in a manner that can ignite nearby materials. Highly publicized incidents of laptop computers and cell phones bursting into flames have focused consumer attention on the safety of these cells. These events also have raised questions about the suitability of these lithium-ion cells for automotive applications. There can be no assurance that a field failure of our battery packs will not occur, which would damage the vehicle or lead to personal injury or death and may subject us to lawsuits. Furthermore, there is some risk of electrocution if individuals who attempt to repair battery packs on our vehicles do not follow applicable maintenance and repair protocols. Any such damage or injury would likely lead to adverse publicity and potentially a safety recall. Any such adverse publicity could adversely affect our business, prospects, financial condition and operating results.

Due to the volatile and flammable nature of certain components of our products and equipment, fires or explosions may disrupt our business or cause significant injuries, which could adversely affect our financial results.

The development and manufacture of certain of our products involves the handling of a variety of explosive and flammable materials as well as high power equipment. From time to time, these activities may result in incidents that could cause us to temporarily shut down or otherwise disrupt some manufacturing processes, causing production delays and resulting in liability for workplace injuries and/or fatalities. We have safety and loss prevention programs that require detailed reviews of process changes and new operations, along with routine safety audits of operations involving explosive materials, to mitigate such incidents, as well as a variety of insurance policies, however our insurance coverage may be inadequate to cover all claims and losses related to such incidents. We may experience such incidents in the future, which could result in production delays or otherwise have a material adverse effect on our business and financial condition.

Our technology, products and services have only been developed in the last several years and we have had only limited opportunities to deploy and assess their performance in the field at full scale.

The current generation of our FullMAX and Scout System™ technology platforms have only been developed in the last several years and will continue to evolve. Deploying and operating our technology is complex and, until recently, had been done primarily by a small number of customers. As the size, complexity and scope of our deployments grow we have been able to test product performance at a greater scale and in a variety of new geographic settings and environmental conditions. As the number, size and complexity of our deployments grow and we deploy our technology platforms for new applications in new critical infrastructure industries, we may encounter unforeseen operational, technical and other challenges, some of which could cause significant delays, trigger contractual penalties, result in unanticipated expenses, and/or damage to our reputation, each of which could materially and adversely affect our business, financial condition and results of operations.

If we fail to respond to evolving technological changes, our products and services could become obsolete or less competitive.

We operate in highly competitive industries characterized by new and rapidly evolving technologies, standards, regulations, customer requirements, as well as frequent product introductions and revisions. Accordingly, our operating results depend upon our ability to develop and introduce new products and services, our ability to reduce production costs of our existing products. The process of developing new technologies and products is complex, and if we are unable to develop enhancements to, and new features for, our existing products and services or acceptable new products and services that keep pace with technological developments or industry standards, our products may become obsolete, less marketable and less competitive and our business, financial condition or results of operations could be significantly harmed.

We depend on our ability to develop new products and to enhance and sustain the quality of existing products.

Our growth and future success will depend, in part, on our ability to continue to design and manufacture new competitive products and to enhance and sustain the quality and marketability of our existing products. As such, we have made, and expect to continue to make, substantial investments in technology development. In the future, we may not have the necessary capital, or access to capital on acceptable terms, to fund necessary levels of research and development. Even with adequate capital resources, we may nonetheless experience unforeseen problems in the development or performance of our technologies or products. In addition, we may not meet our product development schedules and, even if we do, we may not develop new products fast enough to provide sufficient differentiation from our competitors’ products, which may be more successful.

We expect to incur substantial research and development costs and devote significant resources to identifying and commercializing new products and services, which could significantly reduce our profitability and may never result in revenue to us.

Our future growth depends on penetrating new markets, adapting existing products to new applications and new environments, and introducing new products and services that achieve market acceptance. We plan to incur substantial research and development costs as part of our efforts to design, develop and commercialize new products and services and enhance existing products. For example, we will incur research and development costs to improve the functionality of our acoustic DAA solution configuration in certain environments. Further, our research and development programs may not produce successful results, and our new products and services may not achieve market acceptance, create additional revenue or become profitable, which could materially harm our business, prospects, financial results and liquidity.

If our products do not interoperate with our customers’ other systems, the purchase or deployment of our products and services may be delayed or cancelled.

Our products are designed to interface with our customers’ other systems, each of which may have different specifications and utilize multiple protocol standards and products from other vendors. Our products will be required to interoperate with many or all of these products as well as future products in order to meet our customers’ requirements. If we find errors in the existing software or defects in the hardware used in our customers’ systems, we may need to modify our products or services to fix or overcome these errors so that our products will interoperate with the existing software and hardware, which could be costly and negatively affect our business, financial condition, and results of operations. In addition, if our products and services do not interoperate with our customers’ systems, customers may seek to hold us liable, demand for our products could be adversely affected or orders for our products could be delayed or cancelled. This could hurt our operating results, damage our reputation or brand, and seriously harm our prospects, business, financial condition or results of operations.

The Company operates in a competitive market.

The Company faces competition and new competitors will continue to emerge throughout the world. Services offered by the Company’s competitors may take a larger share of customer spending than anticipated, which could cause revenue generated from the Company’s products and services to fall below expectations. It is expected that competition in these markets will intensify. If competitors of the Company develop and market more successful products or services, offer competitive products or services at lower price points, or if the Company does not produce consistently high-quality and well-received products and services, revenues, margins, and profitability of the Company will decline.

The Company’s ability to compete effectively will depend on, among other things, the Company’s pricing of services and equipment, quality of customer service and field support, development of new and enhanced products and services in response to customer demands and changing technology, reach and quality of sales and distribution channels and capital resources. Competition could lead to a reduction in the rate at which the Company adds new customers, a decrease in the size of the Company’s market share and a decline in its customers.

We rely on our management team and need additional personnel to grow our business, and the loss of one or more key officers, employees, contractors and other service providers or our inability to attract and retain qualified personnel could harm our business, financial condition or results of operations.

We depend, in part, on the performance of Eric Brock, our Chief Executive Officer, Derek Reisfield, our President, Chief Financial Officer, Treasurer and Secretary, Stewart Kantor and Menashe Shahar, the President and Chief Technology Officer of Ondas Networks, respectively, and Reese Mozer and Vijay Somandepalli, the Chief Executive Officer and Chief Technology Officer of American Robotics, respectively, to operate and grow our business. The loss of any of Messrs. Brock, Reisfield, Kantor, Shahar, Mozer or Somandepalli could negatively impact our ability to execute our business strategies. Although we have entered into employment agreements with Messrs. Brock, Reisfield, Kantor and Shahar, we may be unable to retain them or replace any of them if we lose their services for any reason.

Our future success will also depend on our ability to attract, retain and motivate highly skilled management, product development, operations, sales, technical and other personnel in the United States and abroad. Even in today’s economic climate, competition for these types of personnel is intense, particularly in the Silicon Valley. All of our employees, contractors and other service providers in the United States work for us on an at-will basis. Given the lengthy sales cycles with utilities and deployment periods of our networking platform and solutions, the loss of key personnel at any time could adversely affect our business, financial condition or results of operations.

Cyberattacks through security vulnerabilities could lead to disruption of business, reduced revenue, increased costs, liability claims, or harm to our reputation or competitive position.

Security vulnerabilities may arise from our hardware, software, employees, contractors or policies we have deployed, which may result in external parties gaining access to our networks, datacenters, cloud datacenters, corporate computers, manufacturing systems, and or access to accounts we have at our suppliers, vendors, and customers. They may gain access to our data or our users’ or customers’ data or attack the networks causing denial of service or attempt to hold our data or systems in ransom. The vulnerability could be caused by inadequate account security practices such as failure to timely remove employee access when terminated. To mitigate these security issues, we have implemented measures throughout our organization, including firewalls, backups, encryption, employee information technology policies and user account policies. However, there can be no assurance these measures will be sufficient to avoid cyberattacks. If any of these types of security breaches were to occur and we were unable to protect sensitive data, our relationships with our business partners and customers could be materially damaged, our reputation could be materially harmed, and we could be exposed to a risk of litigation and possible significant liability.

Further, if we fail to adequately maintain our infrastructure, we may have outages and data loss. Excessive outages may affect our ability to timely and efficiently deliver products to customers or develop new products and solutions. Such disruptions and data loss may adversely impact our ability to fulfill orders, patent our intellectual property or protect our source code, and interrupt other processes. Delayed sales or lost customers resulting from these disruptions could adversely affect our financial results, stock price and reputation.

Unauthorized use or disclosure of, or access to, any personal information maintained by us or on our behalf, whether through breach of our systems, breach of the systems of our suppliers or vendors by an unauthorized party, or through employee or contractor error, theft or misuse, or otherwise, could harm our business. If any such unauthorized use or disclosure of, or access to, such personal information was to occur, our operations could be seriously disrupted, and we could be subject to demands, claims and litigation by private parties, and investigations, related actions, and penalties by regulatory authorities. In addition, we could incur significant costs in notifying affected persons and entities and otherwise complying with the multitude of foreign, federal, state and local laws and regulations relating to the unauthorized access to, or use or disclosure of, personal information. Finally, any perceived or actual unauthorized access to, or use or disclosure of, such information could harm our reputation, substantially impair our ability to attract and retain customers and have an adverse impact on our business, financial condition and results of operations.

We do not control certain aspects of the manufacturing process.

Our reliance on a small number of manufacturers reduces our control over the manufacturing process, exposing us to risks, including reduced control over quality assurance, product costs and product supply including delays in transportation and delivery. Any manufacturing disruption by our usual manufacturers could impair our ability to fulfill orders. We may be unable to manage our relationships with our usual manufacturers effectively as they may experience delays, disruptions, capacity constraints or quality control problems in their manufacturing operations or otherwise fail to meet our future requirements for timely delivery. Similarly, to the extent that our usual manufacturers procure materials on our behalf, we may not benefit from any warranties received by our usual manufacturers from the suppliers or otherwise have recourse against the original supplier of the materials or even the manufacturer. In such circumstances, if the original supplier were to provide us or our usual manufacturers with faulty materials, we might not be able to recover the costs of such materials or be compensated for any damages that arise as a result of the inclusion of the faulty components in our products.

One or more of our usual manufacturers may suffer an interruption in its business, or experience delays, disruptions or quality control problems in its manufacturing operations, or seek to terminate its relationship with us, or we may choose to change or add additional manufacturers for other reasons. Additionally, we do not have long-term supply agreements with our usual manufacturers. As a result, we may be unable to renew or extend our agreement on terms favorable to us, if at all. Although the manufacturing services required to manufacture and assemble our products may be readily available from a number of established manufacturers, it may be risky, time consuming and costly to qualify and implement new manufacturer relationships.

Any of these risks could have a material adverse effect on our business, financial condition and results of operations.

If critical components or raw materials used to manufacture our products or used in our development programs become scarce or unavailable, then we may incur delays in manufacturing and delivery of our products and in completing our development programs, which could damage our business.

In order to produce our Scout System™ and related safety systems, we obtain certain hardware components, as well as subsystems and systems from a limited group of suppliers, some of which are sole source suppliers. We do not have long-term agreements with any of these suppliers that obligate them to continue to sell components, subsystems, systems or products to us. Our reliance on these suppliers involves significant risks and uncertainties, including whether our suppliers will provide an adequate supply of required components, subsystems, or systems of sufficient quality, will increase prices for the components, subsystems or systems and will perform their obligations on a timely basis.

In addition, certain raw materials and components used in the manufacture of our products and in our development programs, are periodically subject to supply shortages, and our business is subject to the risk of price increases and periodic delays in delivery. Particularly, the market for electronic components is experiencing increased demand and a global shortage of semiconductors, creating substantial uncertainty regarding our suppliers’ continued production of key components for our products. If any additional shortages occur and we are unable to obtain components from third party suppliers in the quantities and of the quality that we require, on a timely basis and at acceptable prices, then we may not be able to timely complete development programs or deliver our products on a timely or cost effective basis to our customers, which could cause customers to terminate their contracts with us, increase our costs and seriously harm our business, results of operations and financial condition. Moreover, if any of our suppliers become financially unstable, or otherwise unable or unwilling to provide us with raw materials or components, then we may have to find new suppliers. It may take several months to locate alternative suppliers, if required, or to redesign our products to accommodate components from different suppliers. We may experience significant delays in manufacturing and shipping our products to customers and incur additional development, manufacturing and other costs to establish alternative sources of supply if we lose any of these sources or are required to redesign our products. We cannot predict if we will be able to obtain replacement components within the time frames that we require at an affordable cost, if at all. In particular, governmental measures responsive to the global COVID-19 pandemic have disrupted manufacturing and some supply chains, including our supply chain, which has had, and is expected to continue to have, a significant impact, both direct and indirect, on businesses and commerce worldwide. Although we have not yet seen significant delays from our suppliers and we keep stock of all our raw materials and other product components with long lead times to assist in the event that our supply chain is disrupted, if the COVID-19 outbreak continues and results in a prolonged period of commercial and/or governmental restrictions, this may impact our ability to obtain certain raw materials and certain components used in the manufacture of our products and in our development programs.

We currently do not have long-term supply contracts with guaranteed pricing which exposes us to fluctuations in component, materials and equipment prices. Substantial increases in these prices would increase our operating costs and could adversely affect our business, prospects, financial condition and operating results.

Because we currently do not have long-term supply contracts with guaranteed pricing, we are subject to fluctuations in the prices of the raw materials, parts and components and equipment we use in the production of our Scout System™. Substantial increases in the prices for such raw materials, components and equipment would increase our operating costs and could reduce our margins if we cannot recoup the increased costs through increased prices. Any attempts to increase prices of our automated data solutions in response to increased costs could be viewed negatively by our customers and could adversely affect our business, prospects, financial condition and operating results.

We may pursue additional strategic transactions in the future, which could be difficult to implement, disrupt our business or change our business profile significantly.

We intend to consider additional potential strategic transactions, which could involve acquisitions of businesses or assets, joint ventures or investments in businesses, products or technologies that expand, complement or otherwise relate to our current or future business. We may also consider, from time to time, opportunities to engage in joint ventures or other business collaborations with third parties to address particular market segments. Should our relationships fail to materialize into significant agreements, or should we fail to work efficiently with these companies, we may lose sales and marketing opportunities and our business, results of operations and financial condition could be adversely affected.

These activities, if successful, create risks such as, among others: (i) the need to integrate and manage the businesses and products acquired with our own business and products; (ii) additional demands on our resources, systems, procedures and controls; (iii) disruption of our ongoing business; (iv) potential unknown or unquantifiable liabilities associated with the target company; and (v) diversion of management’s attention from other business concerns. Moreover, these transactions could involve: (a) substantial investment of funds or financings by issuance of debt or equity securities; (b) substantial investment with respect to technology transfers and operational integration; and (c) the acquisition or disposition of product lines or businesses. Also, such activities could result in one-time charges and expenses and have the potential to either dilute the interests of our existing shareholders or result in the issuance of, or assumption of debt. Such acquisitions, investments, joint ventures or other business collaborations may involve significant commitments of financial and other resources. Any such activities may not be successful in generating revenue, income or other returns, and any resources we committed to such activities will not be available to us for other purposes. Moreover, if we are unable to access the capital markets on acceptable terms or at all, we may not be able to consummate acquisitions, or may have to do so on the basis of a less than optimal capital structure. Our inability to take advantage of growth opportunities or address risks associated with acquisitions or investments in businesses may negatively affect our operating results.

Additionally, any impairment of goodwill or other intangible assets acquired in an acquisition or in an investment, or charges to earnings associated with any acquisition or investment activity, may materially reduce our earnings. Future acquisitions or joint ventures may not result in their anticipated benefits, and we may not be able to properly integrate acquired products, technologies or businesses with our existing products and operations or successfully combine personnel and cultures. Failure to do so could deprive us of the intended benefits of those acquisitions.

If the Company is required to write down goodwill and other intangible assets, the Company’s financial condition and results could be negatively affected.

Goodwill impairment arises when there is deterioration in the capabilities of acquired assets to generate cash flows, and the fair value of the goodwill dips below its book value. The Company is required to review its goodwill for impairment at least annually. Events that may trigger goodwill impairment include deterioration in economic conditions, increased competition, loss of key personnel, and regulatory action. Should any of these occur, an impairment of goodwill could have a negative effect on the assets of the Company.

War, terrorism, and other acts of violence may affect the markets in which we operate, our clients and our product and service delivery.

Our business may be adversely affected by regional or global instability, disruption or destruction, regardless of cause, including war, terrorism, riot, civil insurrection or social unrest. For example, the significant military action against Ukraine launched by Russia may affect the markets in which we operate. Such events may cause clients to delay their decisions on spending for the products and services provided by us and give rise to sudden significant changes in regional and global economic conditions and cycles. These events pose risks which could materially adversely affect our financial results.

We may not be able to secure adequate insurance policies, or secure insurance policies at reasonable prices.

We maintain general liability insurance, aviation flight testing insurance, aircraft liability coverage, directors and officers insurance, and other insurance policies and we believe our level of coverage is customary in the industry and adequate to protect against claims. However, there can be no assurance that it will be sufficient to cover potential claims or that present levels of coverage will be available in the future at reasonable cost. Further, we expect our insurance needs and costs to increase as we grow our commercial operations and expand into new markets and its uncertain if such insurance will be available on commercially reasonable terms.

The Company will be affected by operational risks and may not be adequately insured for certain risks.

The Company will be affected by a number of operational risks and the Company may not be adequately insured for certain risks, including: labor disputes; catastrophic accidents; fires; blockades or other acts of social activism; changes in the regulatory environment; impact of non-compliance with laws and regulations; natural phenomena, such as inclement weather conditions, floods, earthquakes and ground movements. There is no assurance that the foregoing risks and hazards will not result in damage to, or destruction of, the Company’s technologies, personal injury or death, environmental damage, adverse impacts on the Company’s operation, costs, monetary losses, potential legal liability and adverse governmental action, any of which could have an adverse impact on the Company’s future cash flows, earnings and financial condition. Furthermore, the unmanned aerial systems industry lacks a formative insurance market. As a result, the Company may be subject to or affected by liability or sustain loss for certain risks and hazards against which the Company cannot insure or which the Company may elect not to insure because of the cost. This lack of insurance coverage could have an adverse impact on the Company’s future cash flows, earnings, results of operations and financial condition.

Litigation may adversely affect our business, financial condition, and results of operations.

From time to time in the normal course of our business operations, we may become subject to litigation that may result in liability material to our financial condition as a whole or may negatively affect our operating results if changes to our business operations are required. The cost to defend such litigation may be significant and may require a significant diversion of our resources, and there is no guarantee that we will be able to successfully defend against any such litigation regardless of particular merits. There also may be adverse publicity associated with litigation that could negatively affect customer perception of our business, regardless of whether the allegations are valid or whether we are ultimately found liable. Insurance may not be available on favorable terms, at all, or in sufficient amounts to cover any liabilities with respect to these or other matters. A judgment or other liability in excess of our insurance coverage for any claims could adversely affect our business, financial condition and the results of our operations.

Risks Related to Regulatory Requirements⁴

We and our customers operate in a highly regulated business environment and changes in regulation could impose costs on us or make our products less economical.

Our products and services and our utility customers are subject to federal, state, local and foreign laws and regulations. Laws and regulations applicable to us and our products govern, among other things, the manner in which our products communicate, and the environmental impact and electrical reliability of our products. Additionally, our critical infrastructure customers are often regulated by national, state and/or local bodies, including public utility commissions, the Department of Energy, the Federal Energy Regulatory Commission, Federal Aviation Administration, the FCC, Federal Rail Association and other bodies. Prospective customers may be required to gain approval from any or all of these organizations prior to implementing our products and services, including specific permissions related to the cost recovery of these systems. Regulatory agencies may impose special requirements for implementation and operation of our products, which may result in unforeseen delays. We may incur material costs or liabilities in complying with government regulations applicable to us or our utility customers. In addition, potentially significant expenditures could be required in order to comply with evolving regulations and requirements that may be adopted or imposed on us or our utility customers in the future. Such costs could make our products less economical and could impact our utility customers’ willingness to adopt our products, which could materially and adversely affect our revenue, results of operations and financial condition.

Furthermore, changes in the underlying regulatory conditions that affect critical infrastructure industries could have a potentially adverse effect on our customers’ interest or ability to implement our technologies. Many regulatory jurisdictions have implemented rules that provide financial incentives for the implementation of energy efficiency and demand response technologies, often by providing rebates or through the restructuring of utility rates. If these programs were to cease, or if they were restructured in a manner inconsistent with the capabilities enabled by our products and services, our business, financial condition and results of operations could be significantly harmed.

Failure to obtain necessary regulatory approvals from the FAA or other governmental agencies, or limitations put on the use of small UAS in response to public privacy and other concerns, may prevent us from expanding the sales of our drone solutions to industrial and government customers in the United States.

The regulation of small UAS for commercial use in the United States is undergoing substantial change and the ultimate treatment is uncertain.

On February 14, 2012, the FAA Modernization and Reform Act of 2012 was enacted, establishing various deadlines for the FAA to allow expanded use of small UAS for both public and commercial applications. On June 21, 2016, the FAA released its final rules regarding the routine use of certain small UAS (under 55 pounds) in the U.S. National Airspace System pursuant to the act (the “Part 107 Rules”). The Part 107 Rules, which became effective in August 2016, provided safety regulations for small UAS conducting non-recreational operations and contain various limitations and restrictions for such operations, including a requirement that operators keep UAS within visual-line-of-sight and prohibiting flights over unprotected people on the ground who are not directly participating in the operation of the UAS. On December 28, 2020, the FAA announced final rules requiring remote identification of drones and allowing operators of small drones to fly over people and at night under certain conditions. On June 8, 2021, the FAA announced the formation of an Aviation Rulemaking Committee (“ARC”) to develop new rules to further define regulations for the operations of UAS Beyond Visual Line-of-Site (“BVLOS”). The timing of additional rulemaking is uncertain as is the outcome of the still developing regulatory environment related to the operation of small UAS.

We cannot assure you that any final rules enacted in furtherance of the FAA’s announced proposals will result in the expanded use of our drones and drone solutions by commercial and industrial entities. In addition, there exists public concern regarding the privacy and other implications of U.S. commercial use of small UAS. This concern has included calls to develop explicit written policies and procedures establishing usage limitations. We cannot assure you that the response from regulatory agencies, customers and privacy advocates to these concerns will not delay or restrict the adoption of small UAS by the commercial use markets.

Substantially all our current products depend on the availability and are subject to the use of licensed radio frequencies regulated by the FCC in the United States.

Substantially all of our current wireless networking products are designed to communicate wirelessly via licensed radio frequencies and therefore depend on the availability of adequate radio spectrum in order to operate. It is possible that the FCC or the U.S. Congress could adopt additional regulations or policies which are or may change or modify current regulations or policies so that they are, harmful to our business or incompatible with our current or future product offerings, as well as products currently installed in the field. Additional regulations or policies or changes or modifications to current regulations or policies may require modification or replacement of our products, including products currently installed in the field, at significant, or even prohibitive, cost to us, and may require changes or modifications to, or termination of, ongoing or planned projects. Any of these developments could materially and adversely impact our business, financial condition or results of operations.

As a manufacturer of commercial UAS, we are subject to various government regulations, restrictions and requirements, and may be subject to additional regulations in the future, violation of which could subject us to sanctions or otherwise harm, restrict or add costs to our business.

As a manufacturer of consumer products, we are subject to significant government regulations, restrictions and requirements, including, in the United States, those issued under the Consumer Products Safety Act, as well as those issued under product safety and consumer protection statutes in our international markets. Failure to comply with any applicable product safety or consumer protection regulation could result in sanctions that could have a negative impact on our business, financial condition and results of operations.

Governments and regulatory agencies in the markets where we manufacture and sell products may enact additional regulations relating to product safety and consumer protection in the future and may also increase the penalties for failure to comply with product safety and consumer protection regulations. In addition, one or more of our customers might require changes in our products, such as the non-use of certain materials, in the future. Complying with any such additional regulations or requirements could impose increased costs on our business. Similarly, increased penalties for non-compliance could subject us to greater expenses in the event any of our products were found to not comply with such regulations. Such increased costs or penalties could harm our business.

Our business is subject to federal, state and international laws regarding data protection, privacy, and information security, as well as confidentiality obligations under various agreements, and our actual or perceived failure to comply with such obligations could damage our reputation, expose us to litigation risk and adversely affect our business and operating results.

In connection with our business, we receive, collect, process and retain certain sensitive and confidential customer information. As a result, we are subject to increasingly rigorous federal, state and international laws regarding privacy and data protection. Personal privacy, data protection and information security are significant issues in the United States and the other jurisdictions where we offer our products and services. The regulatory framework for privacy and security issues worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future. Our handling of data is subject to a variety of laws and regulations, including regulation by various government agencies, including the United States Federal Trade Commission (“FTC”) and various state, local and foreign bodies and agencies. We also execute confidentiality agreements with various parties under which we are required to protect their confidential information.

The United States federal and various state and foreign governments have adopted or proposed limitations on the collection, distribution, use and storage of personal information of individuals, including end-customers and employees. In the United States, the FTC and many state attorneys general are applying federal and state consumer protection laws to the online collection, use and dissemination of data. Additionally, many foreign countries and governmental bodies, and other jurisdictions in which we operate or conduct our business, have laws and regulations concerning the collection and use of personal information obtained from their residents or by businesses operating within their jurisdiction. These laws and regulations often are more restrictive than those in the United States. Such laws and regulations may require companies to implement new privacy and security policies, permit individuals to access, correct and delete personal information stored or maintained by such companies, inform individuals of security breaches that affect their personal information, and, in some cases, obtain individuals’ consent to use personal information for certain purposes.

We also expect that there will continue to be new proposed laws, regulations and industry standards concerning privacy, data protection and information security in the United States, the European Union and other jurisdictions, and we cannot yet determine the impact of such future laws, regulations and standards may have on our business. For example, the California Consumer Privacy Act, which became effective in 2020, provides new data privacy rights for consumers and new operational requirements for companies. Additionally, we expect that existing laws, regulations and standards may be interpreted differently in the future. There remains significant uncertainty surrounding the regulatory framework for the future of personal data transfers from the European Union to the United States with regulations such as the recently adopted General Data Protection Regulation (“GDPR”), which imposes more stringent E.U. data protection requirements, provides an enforcement authority, and imposes large penalties for noncompliance. Future laws, regulations, standards and other obligations, including the adoption of the GDPR, as well as changes in the interpretation of existing laws, regulations, standards and other obligations could impair our ability to collect, use or disclose information relating to individuals, which could decrease demand for our products, require us to restrict our business operations, increase our costs and impair our ability to maintain and grow our customer base and increase our revenue.

Although we are working to comply with those federal, state and foreign laws and regulations, industry standards, contractual obligations and other legal obligations that apply to us, such laws, regulations, standards and obligations are evolving and may be modified, interpreted and applied in an inconsistent manner from one jurisdiction to another, and may conflict with one another, other requirements or legal obligations, our practices or the features of our products. As such, we cannot assure ongoing compliance with all such laws or regulations, industry standards, contractual obligations and other legal obligations, and our efforts to do so may cause us to incur significant costs or require changes to our business practices, which could adversely affect our business and operating results. Any failure or perceived failure by us to comply with federal, state or foreign laws or regulations, industry standards, contractual obligations or other legal obligations, or any actual or suspected security incident, whether or not resulting in unauthorized access to, or acquisition, release or transfer of personal information or other data, may result in governmental enforcement actions and prosecutions, private litigation, fines and penalties or adverse publicity and could cause our customers to lose trust in us, which could have an adverse effect on our reputation and business. Any inability to adequately address privacy and security concerns, even if unfounded, or comply with applicable laws, regulations, policies, industry standards, contractual obligations or other legal obligations could result in additional cost and liability to us, damage our reputation, inhibit sales, and adversely affect our business and operating results.

Risks Related to our Intellectual Property

Our ability to protect our intellectual property and proprietary technology is uncertain.

We rely primarily on patent, trademark and trade secret laws, as well as confidentiality and non-disclosure agreements, to protect our proprietary technologies and intellectual property. As of this filing, Ondas Networks held a total of six issued patents in the U.S., seven patent pending applications in the U.S., and one international pending patent application. Ondas Networks patents expire between 2030 and 2037, subject to any patent extensions that may be available for such patents. As of this filing, American Robotics held a total of 4 issued patents in the U.S., 6 pending patent applications in the U.S., and 6 international pending patent application. American Robotics patents expire between 2036 and 2039, subject to any patent extensions that may be available for such patents. Our intellectual property incorporates internally developed software and hardware design incorporating machine and computer vision and was developed with artificial intelligence and machine learning techniques. This intellectual property is critical to the development of end-to-end systems which reliably enable the automated operation of drones in real-world environments.

We have applied for patent protection relating to certain existing and proposed products and processes. Currently, several of our issued U.S. patents as well as various pending U.S. and foreign patent applications relate to our FullMAX systems and are therefore important to the functionality of our products. If we fail to timely file a patent application in any jurisdiction, we may be precluded from doing so at a later date. Furthermore, we cannot assure you that any of our patent applications will be approved in a timely manner or at all. The rights granted to us under our patents, and the rights we are seeking to have granted in our pending patent applications, may not be meaningful or provide us with any commercial advantage. In addition, those rights could be opposed, contested or circumvented by our competitors, or be declared invalid or unenforceable in judicial or administrative proceedings. The failure of our patents to adequately protect our technology might make it easier or cheaper for our competitors to offer the same or similar products or technologies. Even if we are successful in receiving patent protection for certain products and processes, our competitors may be able to design around our patents or develop products that provide outcomes which are comparable or superior to ours without infringing on our intellectual property rights. Due to differences between foreign and U.S. patent laws, our patented intellectual property rights may not receive the same degree of protection in foreign countries as they would in the United States. Even if patents are granted outside the U.S., effective enforcement in those countries may not be available without significant cost and time expense or at all.

We rely on our trademarks and trade names to distinguish our products from the products of our competitors. Third parties may challenge our use of the trademarks. In the event that our trademarks are successfully challenged, we could be forced to rebrand our products, which could result in loss of brand recognition, and could require us to devote additional resources to marketing new brands. Further, we cannot assure you that competitors will not infringe upon our trademarks, or that we will have adequate resources to enforce our trademarks.

We also rely on trade secrets, know-how and technology, which are not protectable by patents, to maintain our competitive position. We try to protect this information by entering into confidentiality agreements and intellectual property assignment agreements with our officers, employees, contractors and other service providers regarding our intellectual property and proprietary technology. In the event of unauthorized use or disclosure or other breaches of those agreements, we may not be provided with meaningful protection for our trade secrets or other proprietary information. In addition, our trade secrets may otherwise become known or be independently discovered by competitors. To the extent that our commercial partners, collaborators, officers, employees, contractors and other service providers use intellectual property owned by others in their work for us, disputes may arise as to the rights in the related or resulting know-how and inventions. If any of our trade secrets, know-how or other technologies not protected by a patent were to be disclosed to or independently developed by a competitor, our business, financial condition and results of operations could be materially adversely affected.

If a competitor infringes upon one of our patents, trademarks or other intellectual property rights, enforcing those patents, trademarks and other rights may be costly, difficult and time consuming. Patent law relating to the scope of claims in the industry in which we operate is subject to rapid change and constant evolution and, consequently, patent positions in our industry can be uncertain. Even if successful, litigation to defend our patents and trademarks against challenges or to enforce our intellectual property rights could be expensive and time consuming and could divert management’s attention from managing our business. Moreover, we may not have sufficient resources or desire to defend our patents or trademarks against challenges or to enforce our intellectual property rights. Litigation also puts our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing. Additionally, we may provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially valuable. The occurrence of any of these events may harm our business, financial condition and operating results.

Our business may suffer if it is alleged or found that our products infringe the intellectual property rights of others.

Our industries are characterized by the existence of a large number of patents and by litigation based on allegations of infringement or other violations of intellectual property rights. Moreover, in recent years, individuals and groups have purchased patents and other intellectual property assets for the purpose of making claims of infringement in order to extract settlements from companies like ours. To date we have received no claims with respect to our infringement of intellectual property or patents but, in the future, third parties may claim that we are infringing upon their patents or other intellectual property rights. In addition, we may be or may become contractually obligated to indemnify our utility customers or other third parties that use or resell our products in the event our products are alleged to infringe a third-party’s intellectual property rights. Responding to such claims, regardless of their merit, can be time consuming, costly to defend in litigation, divert management’s attention and resources, damage our reputation and brand, and cause us to incur significant expenses. Even if we are indemnified against such costs, the indemnifying party may be unable to uphold its contractual obligations. Further, claims of intellectual property infringement might require us to redesign affected products, delay affected product offerings, enter into costly settlement or license agreements or pay costly damage awards or face a temporary or permanent injunction prohibiting us from marketing, selling or distributing the affected products. If we cannot or do not license the alleged infringed technology on reasonable terms or at all, or substitute similar technology from another source, our revenue and earnings could be adversely impacted. Additionally, our utility customers may not purchase our products if they are concerned that our products infringe third-party intellectual property rights. This could reduce the market opportunity for the sale of our products and services. The occurrence of any of these events may have a material adverse effect on our business, financial condition and results of operations. 

If we are unable to protect the confidentiality of our proprietary information, the value of our technology and products could be adversely affected.

In addition to patented technology, we rely on our unpatented technology, trade secrets and know-how. We generally seek to protect this information by confidentiality, non-disclosure and assignment of invention agreements with our officers, employees, contractors and other service providers and with parties with which we do business. These agreements may be breached, which breach may result in the misappropriation of such information, and we may not have adequate remedies for any such breach. We cannot be certain that the steps we have taken will prevent unauthorized use or reverse engineering of our technology.

Moreover, our trade secrets may be disclosed to or otherwise become known or be independently developed by competitors. To the extent that our officers, employees, contractors, other service providers, or other third parties with whom we do business use intellectual property owned by others in their work for us, disputes may arise as to the rights in related or resulting know-how and inventions. If, for any of the above reasons, our intellectual property is disclosed or misappropriated, it would harm our ability to protect our rights and have a material adverse effect on our business, financial condition, and results of operations.

We use open-source software in our products and services that may subject our products and services to general release or require us to re-engineer our products and services, which may cause harm to our business.

We use open-source software in connection with our products and services. From time to time, companies that incorporate open-source software into their products have faced claims challenging the ownership of open-source software and/or compliance with open source license terms. Therefore, we could be subject to suits by parties claiming ownership of what we believe to be open-source software or noncompliance with open-source licensing terms. Some open-source software licenses require users who distribute open-source software as part of their software to publicly disclose all or part of the source code to such software and/or make available any derivative works of the open-source code on unfavorable terms or at no cost. While we monitor the use of open source software in our products and services and try to ensure that none is used in a manner that would require us to disclose the source code to the related product or that would otherwise breach the terms of an open source agreement, such use could inadvertently occur and we may be required to release our proprietary source code, pay damages for breach of contract, re-engineer our products, discontinue the sale of our products in the event re-engineering cannot be accomplished on a timely basis or take other remedial action that may divert resources away from our development efforts, any of which could adversely affect our business, operating results and financial condition.

Intellectual property rights do not necessarily address all potential threats to our competitive advantage.

The degree of future protection afforded by our intellectual property rights is uncertain because intellectual property rights have limitations, and may not adequately protect our business, or permit us to maintain our competitive advantage. The following examples are illustrative:

Risks Related to our Financial Results

We will need to generate significant sales to achieve profitable operations.

We intend to increase our operating expenses substantially in connection with the planned expansion of our business, establishment of our sales and marketing infrastructure, our ongoing research and development activities, and the commensurate development of our management and administrative functions, but there is no guarantee that we will succeed in these endeavors. We will need to generate significant sales to achieve profitability, and we might not be able to do so. Even if we do generate significant sales, we might not be able to achieve, sustain or increase profitability on a quarterly or annual basis in the future. If our sales grow more slowly than we expect, or if our operating expenses exceed our expectations, our business, financial condition and results of operations may be adversely affected.

Our future profitability may be dependent upon achieving cost reductions and projected economies of scale from increasing manufacturing quantities of our products. Failing to achieve such reductions in manufacturing costs and projected economies of scale could materially adversely affect our business.

We do not know whether or when we will be able to develop efficient, low-cost manufacturing capabilities and processes that will enable us to manufacture (or contract for the manufacture of) these products in commercial quantities while meeting the volume, speed, quality, price, engineering, design and production standards required to successfully market our products. Our failure to develop such manufacturing processes and capabilities in locations that can efficiently service our markets could have a material adverse effect on our business, financial condition, results of operations and prospects. Our future profitability is, in part, dependent upon achieving increased savings from volume purchases of raw materials and component parts, achieving acceptable manufacturing yield and capitalizing on machinery efficiencies. We expect our suppliers to experience a sharp increase in demand for their products. As a result, we may not have reliable access to supplies that we require or be able to purchase such materials or components at cost effective prices. There is no assurance that we will ever be in a position to realize any material, labor and machinery cost reductions associated with higher purchasing power and higher production levels. Failure to achieve these cost reductions could adversely impact our business and financial results.

If business growth falls short of expectations, we may need to obtain additional capital to fund our growth, operations, and obligations.

We may require additional capital to fund our growth, operations, and obligations if our growth plan falls short or takes more time then we anticipate. As our business has grown, we have managed periods of tight liquidity by accessing capital from our stockholders and their affiliates. Our capital requirements will depend on several factors, including:

We may seek additional funds through equity or debt offerings and/or borrowings under additional notes payable, lines of credit or other sources. We do not know whether additional financing will be available on commercially acceptable terms or at all, when needed. For example, increases in interest rates could negatively impact the costs of seeking additional funds through debt offerings and/or borrowings. If adequate funds are not available or are not available on commercially acceptable terms, our ability to fund our operations, support the growth of our business or otherwise respond to competitive pressures could be significantly delayed or limited, which could materially adversely affect our business, financial condition or results of operations.

Our revenue is not predictable and recognition of a significant portion of it will be deferred into future periods.

Once a customer decides to move forward with a large-scale deployment of our products and services, the timing of and our ability to recognize related revenue will depend on several factors, some of which may not be under our control. These factors include shipment schedules that may be delayed or subject to modification, the rate at which our utility customers choose to deploy our products in their network, customer acceptance of all or any part of our products and services, our contractual commitments to provide new or enhanced functionality at some point in the future, other contractual provisions such as liquidated damages, our suppliers’ ability to provide an adequate supply of components, the requirement to obtain regulatory approval, and our ability to deliver quality products according to expected schedules. In light of these factors, the application of complex revenue recognition rules to our products and services has required us to defer, and in the future will likely continue to require us to defer, a significant amount of revenue until undetermined future periods. It may be difficult to predict the amount of revenue that we will recognize in any given period and amounts recognized may fluctuate significantly from one period to the next. 

We identified a material weakness in our internal control over financial reporting. If we are not able to remediate the material weakness and otherwise maintain an effective system of internal control over financial reporting, the reliability of our financial reporting, investor confidence in us and the value of our Common Stock could be adversely affected.

As a public company, we are required to maintain internal control over financial reporting and to report any material weaknesses in such internal controls. A material weakness is defined as a deficiency, or combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of annual or interim financial statements will not be prevented or detected and corrected on a timely basis.

In connection with this annual report for the year ended December 31, 2021, we identified a material weakness in our internal control over financial reporting related to the inadequate review of stock-based compensation issued in connection with the acquisition of American Robotics. Accordingly, our Chief Executive Officer and Chief Financial Officer have certified that, based on their knowledge, the consolidated financial statements, and other financial information included in this Form 10-K, fairly present in all material respects our financial condition, results of operations and cash flows as of, and for, the periods presented in this Form 10-K.

If our steps are insufficient to successfully remediate the material weakness and otherwise establish and maintain an effective system of internal control over financial reporting, the reliability of our financial reporting, investor confidence in us and the value of our Common Stock could be materially and adversely affected. Effective internal control over financial reporting is necessary for us to provide reliable and timely financial reports and, together with adequate disclosure controls and procedures, are designed to reasonably detect and prevent fraud. Any failure to implement required new or improved controls, or difficulties encountered in their implementation could cause us to fail to meet our reporting obligations.

Risks Related to the American Robotics Acquisition

Our business relationships, those of American Robotics or the combined company may be subject to disruption due to uncertainty associated with the acquisition of American Robotics (the “Transaction”).

Parties with which we or American Robotics do business may experience uncertainty associated with the Transaction, including with respect to current or future business relationships with us, American Robotics, or the combined company. Our and American Robotics’ business relationships may be subject to disruption, as customers, distributors, suppliers, vendors, and others may seek to receive confirmation that their existing business relationships with us or American Robotics, as the case may be, will not be adversely impacted as a result of the Transaction or attempt to negotiate changes in existing business relationships or consider entering into business relationships with parties other than us, American Robotics, or the combined company as a result of the Transaction. Any of these other disruptions could have a material adverse effect on our or American Robotics’ business, financial condition, or results of operations or on the business, financial condition, or results of operations of the combined company and could also have an adverse effect on our ability to realize the anticipated benefits of the Transaction. 

If we are unable to implement and maintain effective internal control over financial reporting following completion of the Transaction, we may fail to prevent or detect material misstatements in our financial statements, in which case investors may lose confidence in the accuracy and completeness of our financial reports and the market price of our securities may decline.

We and American Robotics historically maintained separate internal control over financial reporting with different financial reporting processes and different process control software. We are in the process of integrating our internal control over financial reporting with that of American Robotics. We may encounter difficulties and unanticipated issues in combining our respective accounting systems due to the complexity of the financial reporting processes. We may also identify errors or misstatements that could require audit adjustments. If we are unable to implement and maintain effective internal control over financial reporting following completion of the Transaction, we may fail to prevent or detect material misstatements in our financial statements, in which case investors may lose confidence in the accuracy and completeness of our financial reports and the market price of our securities may decline.

American Robotics may have liabilities that are not known, probable or estimable at this time.

After the Transaction, American Robotics is subject to certain past, current, and future liabilities. There could be unasserted claims or assessments against or affecting American Robotics, including the failure to comply with applicable laws and regulations. In addition, there may be liabilities of American Robotics that are neither probable nor estimable at this time that may become probable or estimable in the future, including indemnification requests received from customers of American Robotics relating to claims of infringement or misappropriation of third party intellectual property or other proprietary rights, tax liabilities arising in connection with ongoing or future tax audits and liabilities in connection with other past, current and future legal claims and litigation. Any such liabilities, individually or in the aggregate, could have a material adverse effect on our financial results. We may learn additional information about American Robotics that adversely affects us, such as unknown, unasserted, or contingent liabilities and issues relating to compliance with applicable laws or infringement or misappropriation of third-party intellectual property or other proprietary rights.

Ondas may experience difficulties integrating American Robotics’ business.

Achieving the anticipated benefits of the Transaction will depend in significant part upon whether Ondas and American Robotics integrate their businesses in an efficient and effective manner. Ondas has been able to conduct only limited planning regarding the integration of the companies following the Transaction and has not yet determined the exact nature of how the businesses and operations of the companies will be combined after the Transaction. The actual integration may result in additional and unforeseen expenses, and the anticipated benefits of the integration plan may not be realized. The companies may not be able to accomplish the integration process smoothly, successfully or on a timely basis. The necessity of coordinating geographically separated organizations, systems of controls, and facilities and addressing possible differences in business backgrounds, corporate cultures and management philosophies may increase the difficulties of integration. The companies operate numerous systems and controls, including those involving management information, purchasing, accounting and finance, sales, billing, employee benefits, payroll, and regulatory compliance. The integration of operations following the Transaction will require the dedication of significant management and external resources, which may temporarily distract management’s attention from the day-to-day business of the combined company and be costly. Employee uncertainty and lack of focus during the integration process may also disrupt the business of the combined company. Any inability of management to successfully and timely integrate the operations of the two companies could have a material adverse effect on the business and results of operations of the combined company.

The combined company may not fully realize the anticipated benefits of the Transaction within the timing anticipated or at all.

Ondas and American Robotics entered into the Merger Agreement because each company believes that the Transaction will be beneficial to each of Ondas and American Robotics primarily as a result of the anticipated benefits resulting from the combined company’s operations. The companies may not be able to achieve the anticipated long-term strategic benefits of the Transaction. An inability to realize the full extent of, or any of, the anticipated benefits of the Transaction, as well as any delays that may be encountered in the integration process, which may delay the timing of such benefits, could have an adverse effect on the business and results of operations of the combined company, and may affect the value of Ondas common stock after the completion of the Transaction.

The Transaction involved substantial costs.

We have incurred, and expect to continue to incur, a number of non-recurring costs associated with the Transaction. The substantial majority of the non-recurring expenses will consist of transaction and regulatory costs related to the Transaction. We will also incur transaction fees and costs related to formulating and implementing integration plans, including system consolidation costs and employment-related costs. We continue to assess the magnitude of these costs, and additional unanticipated costs may be incurred from the Transaction and integration. Although we anticipate that the elimination of duplicative costs and the realization of other efficiencies and synergies related to the integration should allow us to offset integration-related costs over time, this net benefit may not be achieved in the near term, or at all.

Risks Related to our Common Stock

We have limited trading activity and as a result, the price of our common stock might fluctuate significantly, and you could lose all or part of your investment.

The limited trading activity and resulting volatility in the market price of our common stock may prevent you from being able to sell your shares of our common stock at or above the price you paid for your shares. The trading price of our common stock may be volatile and subject to wide price fluctuations in response to various factors, including, but not limited to:

Our common stock is listed on Nasdaq under the symbol “ONDS.” There can be no assurance that trading of our common stock on such market will be sustained. In the event that our common stock is not listed on Nasdaq or if we do not sustain such listing, our common stock could be quoted only on the OTC Markets. Under such circumstances, you may find it significantly more difficult to trade, or to obtain accurate quotations for our common stock and our common stock may become substantially less attractive to certain purchasers, such as financial institutions, hedge funds, and other similar investors.

These and other factors might cause the market price of our common stock to fluctuate unpredictably and substantially, which may negatively affect the liquidity of our common stock. In addition, in recent years, the stock market has experienced significant price and volume fluctuations. This volatility has had a significant impact on the market price of securities issued by many companies across many industries, including our industry. The changes frequently appear to occur without regard to the operating performance of the affected companies. Accordingly, the price of our common stock could fluctuate based upon factors that have little or nothing to do with our company, and these fluctuations could materially reduce our stock price.

Securities class action litigation has often been instituted against companies following periods of volatility in the overall market and in the market price of a company’s securities. This litigation, if instituted against us, could result in substantial costs, divert our management’s attention and resources, and harm our business, operating results and financial condition.

Concentration of ownership of our common stock among our existing executive officers, directors and principal stockholders may prevent new investors from influencing significant corporate decisions.

Our executive officers, directors and current beneficial owners of 5% or more of our common stock and their respective affiliates, in the aggregate, beneficially own approximately 20.4% of our outstanding common stock as of March 11, 2022, and as of the date of this filing. As a result, these persons, acting together, would be able to significantly influence all matters requiring stockholder approval, including the election and removal of directors, any merger, consolidation, sale of all or substantially all of our assets, or other significant corporate transactions.

Some of these persons or entities may have interests different than yours. For example, they may be more interested in selling our company to an acquirer than other investors, or they may want us to pursue strategies that deviate from the interests of other stockholders.

We may issue more shares to raise additional capital, which may result in substantial dilution.

Our Amended and Restated Articles of Incorporation authorize the issuance of a maximum of 116,666,667 shares of common stock. Any additional financings effected by us may result in the issuance of additional securities without stockholder approval and the substantial dilution in the percentage of common stock held by our then existing stockholders. In order to raise additional capital, we may in the future offer additional shares of our common stock or other securities convertible into or exchangeable for our common stock at prices that may be higher or lower than the price per share in this offering, and investors purchasing shares or other securities in the future could have rights superior to purchases in this offering or other existing stockholders. Also, we have reserved 6,000,000 shares of common stock for issuance pursuant to future awards under the 2021 Stock Incentive Plan. The issuance of such additional shares of common stock, or securities convertible or exchangeable into common stock, may cause the price of our common stock to decline. Additionally, if all or a substantial portion of these shares are resold into the public markets then the trading price of our common stock may decline.

Our Board may issue and fix the terms of shares of our preferred stock without stockholder approval, which could adversely affect the voting power of holders of our common stock or any change in control of our Company.

Our Amended and Restated Articles of Incorporation authorize the issuance of up to 5,000,000 shares of “blank check” preferred stock, $0.0001 par value per share, with such designation rights and preferences as may be determined from time to time by our Board. Our Board is empowered, without the need to obtain stockholder approval, to issue shares of preferred stock with dividend, liquidation, conversion, voting or other rights which could adversely affect the voting power or other rights of the holders of our common stock. In the event of such issuances, the preferred stock could be used, under certain circumstances, as a method of discouraging, delaying or preventing a change in control of our company.

If securities or industry analysts do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline.

The trading market for our common stock will depend in part on the research and reports that securities or industry analysts publish about us or our business, which research and reports are not and would not be subject to our control. We currently do not have and may never obtain research coverage by securities analysts, and industry analysts that currently cover us may cease to do so. If no securities analysts commence coverage of our company, or if industry analysts cease coverage of our company, the trading price for our stock could be materially and adversely impacted. In the event we obtain securities analyst coverage, if one or more of the analysts who cover us downgrade our stock or publish inaccurate or unfavorable research about our business, our stock price may be materially and adversely impacted. If one or more of these analysts cease coverage of our company or fail to publish reports on us regularly, demand for our stock could decrease, which might cause our stock price and trading volume to decline.

We do not intend to pay dividends for the foreseeable future.

We have never declared or paid cash dividends on our capital stock nor are we under any obligation to declare or pay such cash dividends. We currently intend to retain any future earnings to fund our operations and the development and growth of our business, and we do not expect to declare or pay any dividends in the foreseeable future. Our future ability to pay cash dividends on our capital stock may be limited by any future debt instruments or preferred securities. As a result, you may only receive a return on your investment in our common stock if the market price of our common stock increases to a price above the price you paid for them and you sell such shares.

A significant portion of our total outstanding shares are restricted from immediate resale but may be sold into the market in the future. This could cause the market price of our common stock to drop significantly, even if our business is doing well.

Sales of a substantial number of shares of our common stock in the public market could occur at any time. If our stockholders sell, or the market perceives that our stockholders intend to sell, substantial amounts of our common stock in the public market, the market price of our common stock could decline significantly.

Of the 40,990,604 shares of our common stock issued and outstanding as of December 31, 2021, 25,786,038 shares are freely tradable without restriction by stockholders who are not our affiliates, and 15,114,566 shares are “restricted securities” as defined in Rule 144.

In addition, we filed a registration statement on Form S-3, which was declared effective by the SEC on December 12, 2019, covering the resale of 2,894,862 shares of common stock and 1,447,431 shares of common stock underlying warrants held by selling stockholders (“Investor Warrants”) who participated in a private equity offering during the third and fourth quarter 2019. Pursuant to the registration statement on Form S-3, these selling stockholders may resell all or a portion of the 2,894,862 shares of common stock, and all or a portion of the 1,447,431 shares of common stock underlying the Investor Warrants after the Investor Warrants are exercised by the holders.

In addition, we filed a registration statement on Form S-3, which was declared effective by the SEC on November 1, 2021, covering the resale of 6,749,974 shares of common stock and 1,565,656 shares of common stock underlying warrants held by selling stockholders (“AR Warrants”) in relation to the acquisition of American Robotics. Pursuant to the registration statement on Form S-3, these selling stockholders may resell all or a portion of the 6,749,974 shares of common stock, and all or a portion of the 1,565,656 shares of common stock underlying the AR Warrants after the AR Warrants are exercised by the holders.

In addition, we filed a registration statement on Form S-8 registering the issuance of 6,000,000 shares of common stock reserved for issuance under our 2021 Stock Incentive Plan. Shares registered under this registration statement on Form S-8 are available for sale in the public market subject to vesting arrangements and exercise of options and the restrictions of Rule 144 in the case of our affiliates.

Our shares of common stock are subject to the penny stock rules.

The SEC has adopted rules that regulate broker-dealer practices in connection with transactions in penny stocks. Penny stocks are generally equity securities with a price of less than $5.00, other than securities registered on certain national securities exchanges or authorized for quotation on certain automated quotation systems, provided that current price and volume information with respect to transactions in such securities is provided by the exchange or system. If the price per share of our common stock continues to be is less than $5.00, our common stock will continue to be deemed a penny stock. The penny stock rules require a broker-dealer, before a transaction in a penny stock not otherwise exempt from those rules, to deliver a standardized risk disclosure document containing specified information. In addition, the penny stock rules require that before effecting any transaction in a penny stock not otherwise exempt from those rules, a broker-dealer must make a special written determination that the penny stock is a suitable investment for the purchaser and receive (i) the purchaser’s written acknowledgment of the receipt of a risk disclosure statement; (ii) a written agreement to transactions involving penny stocks; and (iii) a signed and dated copy of a written suitability statement. These disclosure requirements may have the effect of reducing the trading activity in the secondary market for our common stock, and therefore stockholders may have difficulty selling their shares.

Certain provisions of our Amended and Restated Articles of Incorporation and Bylaws and Nevada law make it more difficult for a third-party to acquire us and make a takeover more difficult to complete, even if such a transaction were in the stockholders’ best interest.

Certain provisions of our Amended and Restated Articles of Incorporation and Bylaws and Nevada law make it more difficult for a third-party to acquire us and make a takeover more difficult to complete, even if such a transaction were in the stockholders’ interest. For example, Nevada law provides that approval of two-thirds of the stockholders is required to remove a director, which may make it more difficult for a third-party to gain control of the Company. This concentration of ownership limits the power to exercise control by our minority stockholders.

Our bylaws designate the Eighth Judicial District Court of Clark County of the State of Nevada as the sole and exclusive forum for certain actions, which could limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with the Company and its directors, officers, or other employees and may discourage lawsuits with respect to such claims.

Unless we consent in writing to the selection of an alternative forum, the Eighth Judicial District Court of Clark County of the State of Nevada (the “Court”) shall be the sole and exclusive forum for any stockholder (including a beneficial owner) to bring (i) any derivative action or proceeding brought on behalf of the Company, (ii) any action asserting a claim of breach of a fiduciary duty owed by any Director, officer or other employee of the Company to the Company or the Company’s stockholders, (iii) any action asserting a claim against the Company, any director or the Company’s officers or employees arising pursuant to any provision of the NRS, Chapters 78 or 92A of the NRS or our Amended and Restated Articles of Incorporation or our Bylaws, or (iv) any action asserting a claim against the Company, any director or the Company’s officers or employees governed by the internal affairs doctrine. However, each of these clauses (i) through (iv) will not apply to any claim (x) as to which the Court determines that there is an indispensable party not subject to the jurisdiction of the Court (and the indispensable party does not consent to the personal jurisdiction of the Court within ten (10) days following such determination), (y) for which the Court does not have subject matter jurisdiction, or (z) which is vested in the exclusive jurisdiction of a court or forum other than the Court, including pursuant to Section 27 of the Exchange Act, which provides for exclusive federal jurisdiction over suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder. Furthermore, Section 22 of the Securities Act of 1933, as amended (the “Securities Act”), provides for concurrent jurisdiction for federal and state courts over all suits brought to enforce any duty or liability created by the Securities Act or the rules and regulations thereunder, and as such the exclusive jurisdiction clauses set forth above would not apply to such suits.

Item 1B. Unresolved Staff Comments.

Item 2. Properties.

Our corporate headquarters for Ondas Holdings is located at 411 Waverley Oaks Road, Suite 114, Waltham, MA 02452.

Our offices and facilities for Ondas Networks are located at 165 Gibraltar Court in Sunnyvale, CA (the Property”). On October 30, 2018, we entered into a sublease for the sublet of the Property, representing approximately 21,982 square feet. The sublease expired on February 28, 2021 and was extended to March 31, 2021 under the same terms which included a base rent of approximately $28,577 per month plus additional monthly fees to cover operating expenses, certain legal fees, and personal property taxes associated with the premises. Upon execution of the sublease, we delivered a security deposit to be held in trust equal to one month’s base rent, which was applied to the balance of our sublease obligation in March 2021. On January 22, 2021, we entered into a 24-month lease with the owner and landlord of the Property (the “2021 Lease”), wherein the base rate is $45,000 per month and including a security deposit in the amount of $90,000. The 2021 Lease was effective April 1, 2021.

Our offices and facilities for American Robotics are located at 53 Brigham St, Unit 4, Marlborough, MA, representing approximately 10,450 square feet (the “American Robotics Lease”). On August 5, 2021, the Company acquired American Robotics and the American Robotics Lease, wherein the base rate is $15,469 per month, with an annual increase of 3% through January 2024, with a security deposit of $24,166. On August 19, 2021, American Robotics amended their lease to reduce their space. The Amendment reduced their annual base rent to $8,802 per month, with an annual increase of 3% through January 2024.

On October 8, 2021, American Robotics entered into an 86-month operating lease for space at 411 Waverley Oaks Road, Suite 114, Waltham, MA, representing approximately 18,000 square feet. Lease was scheduled to commence on March 1, 2022 and terminate on April 30, 2029, wherein the base rate is $39,375 per month, increasing 3% annually, with a security deposit due in the amount of $104,040. In conjunction with this new lease, American Robotics is leasing a short-term temporary space at 411 Waverley Oaks Road, Suite 118, Waltham, MA, representing approximately 6,000 square feet at $8,500 per month, until their primary space is available, which is targeted for May 1, 2022.

We believe that our offices and facilities are sufficient for our current needs.

Item 3. Legal Proceedings.

From time to time, we may become involved in various lawsuits and legal proceedings that arise in the ordinary course of business. Litigation is subject to inherent uncertainties and an adverse result in these, or other matters may arise from time to time that may harm our business. We are not currently involved in any legal proceeding or investigation by a governmental agency that we believe will have a material adverse effect on our business, financial condition, or operating results.

The description of legal proceedings in “Note 14 – Commitments and Contingencies” in the accompanying Notes to Consolidated Financial Statements is incorporated herein by reference.

Item 4. Mine Safety Disclosures.

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information

Our common stock originally traded on OTC Markets, the OTC Pink (Current Information) tier of OTC Markets Group, Inc. under the trading symbol “ZVVT” on a very limited basis. On October 5, 2018, the trading symbol changed to “ONDS.” On December 19, 2018, our common stock was uplisted to the OTCQB under the symbol “ONDS”. On December 4, 2020, our common stock was uplisted to the Nasdaq Capital Market under the symbol “ONDS” where it continues to trade on a very limited basis.

Stockholders

As of March 18, 2022, there were 373 stockholders of record.

Dividends

We have never declared nor paid any cash dividends to stockholders. We do not intend to pay cash dividends on our common stock for the foreseeable future, and currently intend to retain any future earnings to fund our operations and the development and growth of our business. The declaration of any future cash dividend, if any, would be at the discretion of our Board (subject to limitations imposed under applicable Nevada law) and would depend upon our earnings, if any, our capital requirements and financial position, our general economic conditions, and other pertinent conditions.

Unregistered Sales of Securities

None during the year ended December 31, 2021

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

None during the quarter ended December 31, 2021.

Item 6. [Reserved]

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

General

You should read the following discussion and analysis in conjunction with our consolidated financial statements and the notes to those financial statements included elsewhere in this Annual Report. This discussion contains forward-looking statements based upon current expectations that involve risks and uncertainties. See “Cautionary Note Regarding Forward-Looking Statements.” Our actual results may differ materially from those contained in or implied by any forward-looking statements

Overview

Ondas Holdings is a leading provider of private wireless, drone, and automated data solutions through its wholly owned subsidiaries Ondas Networks Inc. (“Ondas Networks”) and American Robotics, Inc. (“American Robotics” or “AR”). Ondas Networks and American Robotics together provide users in rail, energy, mining, agriculture, and critical infrastructure markets with improved connectivity, and data collection capabilities and automated decision making to improve operations. Ondas operates these two subsidiaries as separate business segments, and the following is a discussion of each segment.

Ondas Networks Segment

Ondas Networks provides wireless connectivity solutions enabling mission-critical Industrial Internet applications and services. We refer to these applications as the Mission-Critical Internet of Things (“MC-IoT”). Our wireless networking products are applicable to a wide range of MC-IoT applications, which are most often located at the very edge of large industrial networks. These applications require secure, real-time connectivity with the ability to process large amounts of data at the edge of large industrial networks. Such applications are required in all of the major critical infrastructure markets, including rail, electric grids, drones, oil and gas, and public safety, homeland security and government, where secure, reliable and fast operational decisions are required in order to improve efficiency and ensure a high degree of safety and security.

We design, develop, manufacture, sell and support FullMAX, our patented, Software Defined Radio (“SDR”) platform for secure, licensed, private, wide-area broadband networks. Our customers install FullMAX systems in order to upgrade and expand their legacy wide-area network infrastructure. Our MC-IoT intellectual property has been adopted by the Institute of Electrical and Electronics Engineers (“IEEE”), the leading worldwide standards body in data networking protocols, and forms the core of the IEEE 802.16s standard. Because standards-based communications solutions are preferred by our mission-critical customers and ecosystem partners, we have taken a leadership position in IEEE as it relates to wireless networking for industrial markets. As such, management believes this standards-based approach supports the adoption of our technology across a burgeoning ecosystem of global partners and end markets.

Our software-based FullMAX platform is an important and timely upgrade solution for privately-owned and operated wireless wide-area networks, leveraging Internet Protocol-based communications to provide more reliability and data capacity for our mission-critical infrastructure customers. We believe industrial and critical infrastructure markets throughout the globe have reached an inflection point where legacy serial and analog based protocols and network transport systems no longer meet industry needs. In addition to offering enhanced data throughput, FullMAX is an intelligent networking platform enabling the adoption of sophisticated operating systems and equipment supporting next-generation MC-IoT applications over wide field areas. These new MC-IoT applications and related equipment require more processing power at the edge of large industrial networks and the efficient utilization of network capacity and scarce bandwidth resources which can be supported by the “Fog-computing” capability integrated in our end-to-end network platform. Fog-computing utilizes management software to enable edge compute processing and data and application prioritization in the field enabling our customers more reliable, real-time operating control of these new, intelligent MC-IoT equipment and applications at the edge.

We sell our products and services globally through a direct sales force and value-added sales partners to critical infrastructure providers including major rail operators, commercial and industrial drone operators, electric and gas utilities, water and wastewater utilities, oil and gas producers and pipeline operators, and for other critical infrastructure applications in areas such as homeland security and defense, and transportation. We continue to develop our value-added reseller relationships which today include a major strategic partnership with Siemens Mobility (“Siemens”) for the development of new types of wireless connectivity for the global rail markets. In addition, Ondas and JVCKenwood, a global supplier of Land Mobile Radio (LMR) systems, have jointly responded to a request from the rail industry for the design and delivery of a next generation data and voice platform.  We believe our Siemens Mobility partnership and our joint effort with JVCKenwood are indicative of the potential for additional Tier 1 partnerships in our other vertical markets including securing reseller relationships with major suppliers to the worldwide government and homeland security markets. These partnerships are being driven by the flexibility of our FullMAX software to support legacy industrial protocols (e.g., Push to Talk Voice, Dial-up Serial Data Communications, and Advanced Train Control System – ATCS) while simultaneously operating our state-of-the-art MC-IoT protocols. This dual and multi-mode software capability provides major industrial customers with a seamless migration path to advanced internet-protocol-based networks. Over time, these legacy functions, like Push to Talk Voice and ATCS, are transformed into just several of many new data applications we can support.

The Global Rail Markets and our Siemens Mobility Partnership

The North American Rail Network is vast in scale, consisting of 140,000 miles of track, 25,000 locomotives, and 1.6 million railcars. Within this large footprint, we believe there are 200,000 highway crossings, with at least 65,000 of the crossings equipped with electronic systems today, a number which is expected to increase in the coming years. We believe a significant portion of the communications infrastructure has been in operation for more than 20 years and now requires a technological upgrade to support new applications and increased capacity requirements. Our MC-IoT platform offers an excellent migration path for these applications. We believe the Class I Rails value the ability of Ondas’ frequency-agnostic SDR architecture to enable a substantial capacity increase utilizing the railroad’s existing wireless infrastructure and dedicated FCC licensed radio frequencies, as well as the flexibility to adapt to and take advantage of future changes in spectrum availability. The Class 1 Rails operate four separate nationwide networks, all of which are addressable by our FullMAX platform. Ondas is targeting the 900 MHz network for the initial adoption of its wireless platform by the Class 1 Rails, who were awarded greenfield spectrum in the 900 MHz band by the FCC in 2020.

Siemens Partnership, ATCS Development Program

In April 2020, we entered a strategic partnership with Siemens, to jointly develop wireless communications products for the North American Rail Industry based on Siemens’ Advanced Train Control System (“ATCS”) protocol and our MC-IoT platform. At the same time, we entered into an agreement to allow Siemens to sell Ondas’ 802.16 MC-IoT standardized products to the North American Rails under the Siemens’ brand name “Airlink”. The dual-mode ATCS/MC-IoT radio system was designed to support Siemens’ extensive installed base of ATCS radios as well as offer Siemens’ customers the ability to support a host of new advanced rail applications utilizing our MC-IoT wireless system. These new applications, including Advanced Grade Crossing Activation and Monitoring, Wayside Inspection, Railcar Monitoring, and support for next generation signaling and train control systems, are designed to increase railroad productivity, reduce costs, and improve safety. Siemens formally launched the dual mode ATCS / MC-IoT radio products along with the Siemens branded Airlink radios in September 2021 at the Railway Systems Suppliers (RSSI) conference in Indianapolis. In November 2021, Siemens secured its first commercial 900 MHz rail order for a major Class I Railroad for delivery by year-end. Ondas delivered this initial order as requested in December 2021.

Multiple New Joint Development Programs

In January of 2021, Ondas Networks and Siemens signed a Letter of Intent (“LOI”) for the development of a next generation radio product for the global rail markets including support for our first onboard locomotive radio. The formal agreement, referred to as the Next Generation Radio Board, was signed by the parties in July 2021 with a targeted completion date in first quarter 2022. Also in July 2021, Ondas Networks received a purchase order from Siemens Mobility for the development of a new industrial radio to support rail safety. This program was completed as requested by September 2021. In October 2021, Siemens substantially expanded the Next Generation Radio Board development program by issuing to Ondas Networks four new purchase orders which included customized hardware and software solutions for Head of Train (HOT) locomotive applications for the North American market and for a major Asian Rail customer. The expanded program reprioritized the July 2021 agreement deliverables with a Q2 2022 delivery of completed products to the Asian Rail customer.

802.16 (“dot16”) Rail Lab

In December 2021, we received an order from Siemens for the implementation of the “dot16” North American Rail Lab ("Rail Lab"). The Rail Lab, hosted at Ondas Networks headquarters facility in Sunnyvale, CA, serves multiple purposes including interoperability and coexistence testing of 802.16 compliant wireless systems, customization and optimization of different network rail configurations, and next generation rail application testing. Importantly, the lab is focused on multiple frequency bands and networks beyond the 900 MHz that Ondas is targeting for commercial deployment.

To summarize, since announcing our strategic partnership in April 2020, Ondas and Siemens have completed our first major joint development program for ATCS / MC-IoT 900 MHz radios for the North American market and have secured and delivered on initial orders of these products to a Class I railroad. In July 2021, we entered into our second major joint development program for a global onboard locomotive radio and this program was significantly expanded in October 2021 to incorporate specific locomotive protocols with initial delivery of completed products in Q2 2022. In September 2021, Siemens launched their Siemens-branded MC-IoT wireless systems under brand name ‘Airlink’. And in December 2021, Siemens together with Ondas secured the Rail Lab order from the North American railroads which will allow the companies to support the deployment of multiple North American rail communications networks based on the 802.16 standard.

Ondas believes the Siemens strategic partnership validates our wireless connectivity solutions and will serve as the foundation for the continued adoption of our wireless technology in the global rail markets.

UAS, Drones and AURA Network Systems

In December 2019, Ondas Networks received a purchase order for FullMAX base stations and remote radios from AURA Networks Systems (“AURA”), a privately held company deploying a nationwide network for the command and control of commercial drones. AURA’s key differentiator is its exclusive ownership of dedicated, licensed Air-to-Ground frequencies. We believe that operators of large, fast-moving, and high-flying drones, including those used for inspection and security applications as well as those for the Urban Air Mobility market (also known as “flying cars”), will require a secure command and control network like that planned by AURA. This command and control (C2) network will be designed to meet FAA requirements in order to fly long distances beyond visual line of site (BVLOS) of a drone operator.

In July 2020, we completed delivery of AURA’s first purchase order for the ground infrastructure. AURA has now installed its initial nationwide infrastructure based on our FullMAX technology in order to satisfy their FCC license requirements. In January 2021, AURA achieved another major milestone with approval from the FCC to use their frequencies for UAS/Drone operation. Based on this approval and other advances in the network, AURA placed a new purchase order in the first quarter of 2021 for continued system development related to the optimization of FullMAX base station and remote radio equipment for customer testing and demonstration networks. We have completed this project as of December 2021.

Additional Critical Markets

In the coming quarters we expect to launch additional initiatives to take our MC-IoT connectivity and ecosystem partnering strategy into other critical infrastructure markets. As evidence of this, in February 2021, we announced a new partnership with Rogue Industries to target opportunities in US Government and DoD markets. Rogue is an agile, focused marketing organization with significant expertise in bringing new technologies to these critical markets along with significant governmental procurement expertise. This expertise would otherwise require significant expense and time for Ondas to develop internally. Our agreement with Rogue is another example of Ondas leveraging what we refer to our “Ecosystem Flywheel” with our capital-light business model.

American Robotics Segment

American Robotics designs, develops and manufactures autonomous drone systems, providing high-fidelity, ultra-high-resolution aerial data to enterprise customers. We provide our customers turnkey data solutions designed to meet their unique requirements in the field. We do this via our internally developed Scout System™, an industrial drone platform which provides commercial and government customers with the ability to continuously digitize, analyze, and monitor their assets and field operations in near real-time.

The Scout System™ has been designed from the ground up as an end-to-end product capable of continuous unattended operations in the real world. Powered by innovations in robotics automation, machine vision, edge computing, and AI, the Scout System™ provides efficiencies as a drone solution for commercial use. Once installed in the field at customer locations, a fleet of connected Scout Systems remain indefinitely in an area of operation, automatically collecting data each day, self-charging, and seamlessly delivering data analysis regularly and reliably. AR markets the Scout System™ under a Robot-as-a-Service (“RaaS”) business model, whereby our drone platform aggregates customer data and provides the data analytics meeting customer requirements in return for an annual subscription fee.

The Scout System™ consists of (i) Scout™, a highly automated, AI-powered drone with advanced imaging payloads (ii) the ScoutBase^TM, a ruggedized weatherproof base station for housing, charging, data processing, and cloud transfer, and (iii) ScoutView^TM, a secure web portal and API which enables remote interaction with the system, data, and resulting analytics anywhere in the world. These major subsystems are connected via a host of supporting technologies. Using a suite of proprietary technologies, including Detect-and-Avoid (“DAA”) and other proprietary intelligent safety systems, we achieved the first and only Federal Aviation Administration (“FAA”) approval for automated operations without a human on-site in the United States on January 15, 2021. As a result, American Robotics currently has the unique ability to serve markets which require automated drone technology to enable scalable drone operations, which the Company estimates to be 90% of all commercial drone applications.

American Robotics sells its products and services nationally through a direct sales force to large enterprises that operate in the agriculture, industrial and critical infrastructure verticals that include major rail operators, electric and gas utilities, oil and gas producers, large agricultural input manufacturers, large agricultural coops, and for other critical infrastructure applications in areas such as homeland security and defense, and transportation.

As of December 31, 2021, American Robotics had signed subscription agreements of varying contract lengths with customers in multiple industries including agriculture, oil and gas and materials management

COVID-19

In December 2019, a novel strain of coronavirus (“COVID-19”) was identified and has resulted in increased travel restrictions, business disruptions and emergency quarantine measures across the world including the United States.

The Company’s business, financial condition and results of operations were impacted from the COVID-19 pandemic for the years ended December 31, 2021 and 2020 as follows:

In the first quarter of 2020, we reduced our business activity to critical operations only, and furloughed 80% of our workforce. Per orders issued by the Health Officer of the County of Santa Clara, our corporate offices and facilities were closed, except for functions related to the support of remote workers and product support related to the essential transportation sector. On May 13, 2020, we reopened our offices and facilities and as of December 31, 2020 we had no employees remaining on furlough. Of the 18 employees previously furloughed, 14 are currently employed by us.

The Company expects its business, financial condition and results of operations will be impacted from the COVID-19 pandemic during 2022, primarily due to the slowdown of customer activity during 2020 and 2021, ongoing supply chain constraints for certain critical parts, and difficulties in attracting employees. The extent to which the coronavirus may impact our business will depend on future developments, which are highly uncertain and cannot be predicted, including new information which may emerge concerning the severity of the COVID-19 and its variants. As a result, the Company is unable to reasonably estimate the full extent of the impact from the COVID-19 pandemic on its future business, financial conditions, and results of operations. In addition, if the Company were to experience any new impact to its operations or incur additional unanticipated costs and expenses as a result of the COVID-19 pandemic, such operational delays and unanticipated costs and expenses could further adversely impact the Company’s business, financial condition and results of operations during 2022.

American Robotics Acquisition

Merger Agreement

On May 17, 2021, the Company entered into an Agreement and Plan of Merger (the “Agreement”) with Drone Merger Sub I Inc., a Delaware corporation and a direct wholly owned subsidiary of the Company (“Merger Sub I”), Drone Merger Sub II Inc., a Delaware corporation and a direct wholly owned subsidiary of the Company (“Merger Sub II”), American Robotics, and Reese Mozer, solely in his capacity as the representative of American Robotics’ Stockholders (as defined in the Agreement). American Robotics is a company focused on designing, developing, and marketing industrial drone solutions for rugged, real-world environments. AR’s Scout System™ is a highly automated, AI-powered drone system capable of continuous, remote operation and is marketed as a “drone-in-a-box” turnkey data solution service under a Robot-as-a-Service (RAAS) business model. The Scout System™ is the first drone system approved by the FAA for automated operation beyond-visual-line-of-sight (BVLOS) without a human operator on-site.

On August 5, 2021 (the “Closing Date”), the Company’s stockholders approved the issuance of shares of the Company’s common stock, including shares of common stock underlying Warrants (as defined below), in connection with the acquisition of American Robotics.

On the Closing Date, American Robotics merged with and into Merger Sub I, with American Robotics continuing as the surviving entity, and American Robotics then subsequently and immediately merged with and into Merger Sub II (“Merger II”), with Merger Sub II continuing as the surviving entity and as a direct wholly owned subsidiary of the Company. Simultaneously with Merger II, Merger Sub II was renamed American Robotics, Inc.

Pursuant to the Agreement, American Robotics stockholders and certain service providers received (i) cash consideration in an amount equal to $7,500,000, less certain indebtedness, transaction expenses and other expense amounts as described in the Agreement; (ii) 6,750,000 shares of the Company’s common stock (inclusive of 26 fractional shares paid in cash as set forth in the Agreement); (iii) warrants exercisable for 1,875,000 shares of the Company’s common stock (the “Warrants”) (inclusive of 24 fractional shares paid in cash and the equivalent of Warrants for 309,320 shares representing the value of options exercisable for 211,038 shares issued under the Company’s incentive stock plan and reducing the aggregate amount of Warrants as set forth in the Agreement); and (iv) the cash release from the PPP Loan Escrow Amount (as defined in the Agreement). Each of the Warrants entitle the holder to purchase a number of shares of the Company’s common stock at an exercise price of $7.89. Each of the Warrants shall be exercisable in three equal annual installments commencing on the one-year anniversary of the Closing Date and shall have a term of ten years. 59,544 of the stock options were issued fully vested to employees who did not exercise their American Robotics options prior to the Closing Date and had no ongoing service requirements and were included in the purchase consideration. The remaining 151,494 stock options issued vest over four years and are contingent on ongoing employment by the Company and are recorded as compensation expense over the service period.

Also on the Closing Date, the Company entered into employment agreements and issued 1,375,000 restricted stock units (“RSUs) under the Company’s incentive stock plan to key members of American Robotics’ management. These RSUs vest in equal installments on the next three anniversaries of the Closing Date and vesting is contingent on the individuals remaining employed by the Company. These RSUs are not included in purchase consideration and are expensed ratably over the service period. They were valued at the closing market price on the Closing Date.

The Company’s Consolidated Financial Statements for the year ended December 31, 2021 include results of operations of American Robotics for the period from the Closing Date to December 31, 2021.

See Note 5 to the accompanying Consolidated Financial Statements for further information regarding the American Robotics acquisition.

Results of Operations

Year ended December 31, 2021 compared to year ended December 31, 2020

Revenues

Revenue increased to $2,906,771 for the year ended December 31, 2021 from $2,163,719 for the year ended December 31, 2020. Revenues during the year ended December 31, 2021 included $405,569 for products, $96,934 for maintenance, service, support, and subscriptions, $2,401,474 for development agreements with Siemens Mobility and AURA Networks, and $2,794 for other revenues. Revenues during the same period in 2020 included $1,151,557 for products, $62,410 for maintenance/service contracts, $943,357 for development agreements, and $6,395 for other revenues.

Cost of goods sold

Cost of goods sold increased to $1,810,942 for the year ended December 31, 2021 from $1,236,051 for the year ended December 31, 2020. The increase in cost of goods sold was the result of additional development costs being allocated to development agreements in line with the increased revenue.

Gross profit

Our gross profit increased by $168,161 for the year ended December 31, 2021 compared to the year ended December 31, 2020 based on the changes in revenues and costs of sales as discussed above. Gross margin for the periods in 2021 and 2020 was 38% and 43%, respectively. This decrease in gross margin is due to a higher mix of development projects with lower margins as compared to higher margin product sales in the prior year period.

Operating Expenses

Our principal operating costs include the following items as a percentage of total expense.

Operating expenses increased by $6,617,892 as a result of the following items:

The increase in operating expenses was primarily due to an increase of approximately $1,871,000 in professional fees, of which approximately $1,644,000 related to the American Robotics acquisition, increase of $1,479,000 in facilities and other expenses including insurance due to acquisition of American Robotics, increase of approximately $1,347,000 in depreciation and amortization expense due to amortization of American Robotics intangible assets, and an increase of approximately $1,285,000 in R&D development expenses for the year ended December 31, 2021. Human resource costs increased by approximately $423,000 in 2021 compared to 2020 due to addition of American Robotics payroll and increased headcount at Ondas Networks, partially offset by a decrease of approximately $1,423,000 in stock-based compensation.

Operating Loss

As a result of the foregoing, our operating loss increased by $6,449,731 to $17,973,617 for the year ended December 31, 2021, compared with $11,523,886 for the year ended December 31, 2020. The operating loss increased primarily as a result of an increase in operating expenses of approximately $6,618,000 primarily associated with the American Robotics acquisition as described above.

Other Income (Expense), net

Other expense, decreased by $1,981,787 to other income of $27,793 for the year ended December 31, 2021, compared to other expense of $1,953,994 for the year ended December 31, 2020. During the year ended December 31, 2021, compared to the year ended December 31, 2020, we reported a decrease in interest expense of $1,361,162 due to payoff of the Steward Capital note payable in the second quarter of 2021 as well as $571,691 increase in other income primarily due to the PPP loan forgiveness of $666,091.

Net Loss

As a result of the net effects of the foregoing partially offset by the provision for income tax benefit reported in the amount of $2,921,982, net loss increased by $1,545,962 to $15,023,842 for the year ended December 31, 2021, compared with $13,477,880 for the year ended December 31, 2020. Net loss per share of common stock, basic and diluted, was $(0.44) for the year ended December 31, 2021, compared with approximately $(0.66) for the year ended December 31, 2020. The income tax benefit resulted from the release of valuation allowance against Ondas net operating loss carryforwards to offset the deferred liability acquired as part of the American Robotics acquisition.

Summary of (Uses) and Sources of Cash

The principal use of cash in operating activities for the year ended December 31, 2021 was to fund the Company’s current expenses primarily related to both sales and marketing and research and development activities necessary to allow us to service and support customers. The increase in cash flows used in operating activities of approximately $9,361,000 was primarily due to reduction in payables and accruals and increase in expenses related to acquisition of American Robotics. Cash flows used in investing activities increased by approximately $10,194,000 primarily due to the acquisition of American Robotics, investment in Dynam A.I., purchase of lab equipment, and a security deposit on our lease renewal in Sunnyvale, CA. The increase in cash provided by financing activities of approximately $10,402,000 was due to the 2021 Public Offering which raised approximately $47,524,000 compared to 2020 Public offering that raised approximately $31,254,000, partially offset by repayment of the Steward Capital Loan and proceeds from sale of preferred stock in 2020.

Liquidity and Capital Resources

We have incurred losses since inception and have funded our operations primarily through debt and the sale of capital stock. On December 31, 2021, we had stockholders’ equity of approximately $112,233,000. On December 31, 2021, we had net long-term borrowings outstanding of approximately $300,000 and no short-term borrowings. On December 31, 2021, we had cash of approximately $40,815,000 and working capital of approximately $40,032,000.

In December 2020, the Company completed a registered public offering of its common stock, generating net proceeds of approximately $31,254,000. In June 2021, the Company completed another registered public offering of its common stock, generating net proceeds of approximately $47,524,000. We believe the funds raised in the December 2020 and June 2021 equity offerings, in addition to growth in revenue expected as the Company executes its business plan, will fund its operations for at least the next twelve months from the issuance date of the accompanying financial statements.

Our future capital requirements will depend upon many factors, including progress with developing, manufacturing and marketing our technologies, the time and costs involved in preparing, filing, prosecuting, maintaining and enforcing patent claims and other proprietary rights, our ability to establish collaborative arrangements, marketing activities and competing technological and market developments, including regulatory changes and overall economic conditions in our target markets. Our ability to generate revenue and achieve profitability requires us to successfully market and secure purchase orders for our products and services from customers currently identified in our sales pipeline as well as new customers. We also will be required to efficiently manufacture and deliver equipment on those purchase orders. These activities, including our planned research and development efforts, will require significant uses of working capital. There can be no assurance that we will generate revenue and cash as expected in our current business plan. We may seek additional funds through equity or debt offerings and/or borrowings under additional notes payable, lines of credit or other sources. We do not know whether additional financing will be available on commercially acceptable terms or at all, when needed. If adequate funds are not available or are not available on commercially acceptable terms, our ability to fund our operations, support the growth of our business or otherwise respond to competitive pressures could be significantly delayed or limited, which could materially adversely affect our business, financial conditions, or results of operations.

Off-Balance Sheet Arrangements

As of December 31, 2021, we had no off-balance sheet arrangements.

Critical Accounting Estimates

The preparation of financial statements in accordance with accounting principles generally accepted in the United States of America (“GAAP”) requires management to make estimates and assumptions that affect reported amounts and related disclosures in the financial statements. Management considers an accounting estimate to be critical if:

We base our estimates and judgments on our experience, our current knowledge, our beliefs of what could occur in the future, our observation of trends in the industry, information provided by our customers and information available from other sources. Actual results may differ from these estimates under different assumptions or conditions. We have identified the following accounting policies and estimates as those that we believe are most critical to our financial condition and results of operations and that require management’s most subjective and complex judgments in estimating the effect of inherent uncertainties: share-based compensation expense, income taxes, complex derivative financial instruments and impairment of long-lived assets including intangible assets acquired in business combinations. 

Share-Based Compensation Expense. We calculate share-based compensation expense for option awards and certain warrant issuances (“Share-based Award(s)”) based on the estimated grant/issue date fair value using the Black-Scholes-Merton option pricing model (“Black-Scholes Model”) and recognize the expense on a straight-line basis over the vesting period. We account for forfeitures as they occur. We have not included an estimate for forfeitures due to our limited history and we revise based on actual forfeitures each period. The Black-Scholes Model requires the use of a number of assumptions including volatility of the stock price, the weighted average risk-free interest rate, and the vesting period of the Share-based Award in determining the fair value of Share-based Awards. Although we believe our assumptions used to calculate share-based compensation expense are reasonable, these assumptions can involve complex judgments about future events, which are open to interpretation and inherent uncertainty. In addition, significant changes to our assumptions could significantly impact the amount of expense recorded in a given period.

Income Taxes. As part of the process of preparing our consolidated financial statements, we are required to estimate income taxes in each of the jurisdictions in which we operate. Our provision for income taxes is determined using the asset and liability approach to account for income taxes. A current liability is recorded for the estimated taxes payable for the current year. Deferred tax assets and liabilities are recorded for the estimated future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using the enacted tax rates in effect for the year in which the timing differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of changes in tax rates or tax laws are recognized in the provision for income taxes in the period that includes the enactment date. Valuation allowances are established, when necessary, to reduce deferred tax assets to the amount more-likely-than-not to be realized. Changes in valuation allowances will flow through the statement of operations unless related to deferred tax assets that expire unutilized or are modified through translation, in which case both the deferred tax asset and related valuation allowance are similarly adjusted. Where a valuation allowance was established through purchase accounting for acquired deferred tax assets, any future change will be credited or charged to income tax expense. See Note 13 in the accompanying Notes to Consolidated Financial Statements for discussion related to Tax Reform.

The determination of our provision for income taxes requires significant judgment, the use of estimates, and the interpretation and application of complex tax laws. In the ordinary course of our business, there are transactions and calculations for which the ultimate tax determination is uncertain. In spite of our belief that we have appropriate support for all the positions taken on our tax returns, we acknowledge that certain positions may be successfully challenged by the taxing authorities. We determine the tax benefits more likely than not to be recognized with respect to uncertain tax positions. Although we believe our recorded tax assets and liabilities are reasonable, tax laws and regulations are subject to interpretation and inherent uncertainty; therefore, our assessments can involve both a series of complex judgments about future events and rely on estimates and assumptions. Although we believe these estimates and assumptions are reasonable, the final determination could be materially different than that which is reflected in our provision for income taxes and recorded tax assets and liabilities.

Complex Derivative Financial Instruments. From time to time, we sell common stock, and we issue convertible debt, both with common stock purchase warrants, which may include terms requiring conversion price or exercise price adjustments based on subsequent issuance of securities at prices lower than those in the agreements of such securities. In these situations, the instruments may be accounted for as liabilities and recorded at fair value each reporting period. Due to the complexity of the agreement, we use an outside expert to assist in providing the mark to market fair valuation of the liabilities over the reporting periods in which the original agreement was in effect. It was determined that a Binomial Lattice option pricing model using a Monte Carlo simulation would provide the most accuracy given all the potential variables encompassing a future dilutive event. This model incorporated transaction assumptions such as our stock price, contractual terms, maturity, risk free rates, as well as estimates about future financings, volatility, and holder behavior. Although we believe our estimates and assumptions used to calculate the fair valuation liabilities and related expense were reasonable, these assumptions involved complex judgments about future events, which are open to interpretation and inherent uncertainty. In addition, significant changes to our assumptions could significantly impact the amount of expense recorded in a given period.

Impairment of Long-Lived Assets. Carrying values of property and equipment and finite-lived intangible assets are reviewed for impairment whenever events or changes in circumstances indicate that their carrying values may not be recoverable. If impairment indicators are present, we determine whether an impairment loss should be recognized by testing the applicable asset or asset group’s carrying value for recoverability. This assessment requires the exercise of judgment in assessing the future use of and projected value to be derived from the eventual disposal of the assets to be held and used. Assessments also consider changes in asset utilization, including the temporary idling of capacity and the expected timing for placing this capacity back into production. If the carrying value of the assets are not recoverable, then a loss is recorded for the difference between the assets’ fair value and respective carrying value. The fair value of the assets is determined using an “income approach” based upon a forecast of all the expected discounted future net cash flows associated with the subject assets. Some of the more significant estimates and assumptions include: market size and growth, market share, projected selling prices, manufacturing cost and discount rate. Our estimates are based upon historical experience, commercial relationships, market conditions and available external information about future trends

Recent Accounting Pronouncements

Recently Adopted Accounting Pronouncements

In December 2019, the FASB issued ASU 2019-12, Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes, which removes certain exceptions for recognizing deferred taxes for investments, performing intra-period tax allocation and calculating income taxes in interim periods. ASU 2019-12 is applicable to all entities subject to income taxes. ASU 2019-12 provides guidance to minimize complexity in certain areas by introducing a policy election to not allocate consolidated income taxes when a member of a consolidated tax return is not subject to income tax and guides whether to relate a step-up tax basis to a business combination or separate transaction. ASU 2019-12 changes the current guidance of making an intraperiod allocation, determining when a tax liability is recognized after a foreign entity investor transition to or from equity method of accounting, accounting for tax law changes and year-to-date losses in interim periods, and determining how to apply income tax guidance to franchise taxes. The amendments from ASU 2019-12 are effective for all public business entities for fiscal years beginning after December 15, 2020 and include interim periods. The guidance is effective for all other entities for fiscal years beginning after December 15, 2021 and for interim periods beginning after December 15, 2022. Early adoption was permitted. The adoption of this pronouncement during the year ended December 31, 2021 had no impact on our accompanying consolidated financial statements. 

Recently Issued Accounting Pronouncements

In October 2021, the FASB issued ASU 2021-08, Business Combinations (Topic 805): Accounting for Contract Assets and Contract Liabilities from Contracts with Customers, which requires contract assets and contract liabilities (i.e., deferred revenue) acquired in a business combination to be recognized and measured by the acquirer on the acquisition date in accordance with ASC 606, Revenue from Contracts with Customers, as if it had originated the contracts. The new guidance creates an exception to the general recognition and measurement principles of ASC 805, Business Combinations. The new guidance should be applied prospectively and is effective for all public business entities for fiscal years beginning after December 15, 2022 and include interim periods. The guidance is effective for all other entities for fiscal years beginning after December 15, 2023, including interim periods within those fiscal years. Early adoption is permitted. The Company is currently evaluating the effects of the adoption of ASU No. 2021-08 on its consolidated financial statements.

In May 2021, the Financial Accounting Standards Board (“FASB”) issued accounting standards update (“ASU”) 2021-04—Earnings Per Share (Topic 260), Debt— Modifications and Extinguishments (Subtopic 470-50), Compensation—Stock Compensation (Topic 718), and Derivatives and Hedging—Contracts in Entity’s Own Equity (Subtopic 815-40): Issuer’s Accounting for Certain Modifications or Exchanges of Freestanding Equity-Classified Written Call Options, to clarify and reduce diversity in an issuer’s accounting for modifications or exchanges of freestanding equity-classified written call options (for example, warrants) that remain equity classified after modification or exchange. The amendments in this ASU are effective for public and nonpublic entities for fiscal years beginning after December 15, 2021, and interim periods with fiscal years beginning after December 15, 2021. Early adoption is permitted, including adoption in an interim period. The Company is currently evaluating the effects of the adoption of ASU No. 2021-04 on its consolidated financial statements.

In August 2020, the FASB issued ASU No. 2020-06, Accounting for Convertible Instruments and Contracts in an Entity’s Own Equity (“ASU 2020-06”), which simplifies an issuer’s accounting for convertible instruments by reducing the number of accounting models that require separate accounting for embedded conversion features. ASU 2020-06 also simplifies the settlement assessment that entities are required to perform to determine whether a contract qualifies for equity classification and makes targeted improvements to the disclosures for convertible instruments and earnings-per-share (EPS) guidance. This update will be effective for the Company’s fiscal years beginning after December 15, 2023, and interim periods within those fiscal years. Early adoption is permitted, but no earlier than fiscal years beginning after December 15, 2020, and interim periods within those fiscal years. Entities can elect to adopt the new guidance through either a modified retrospective method of transition or a fully retrospective method of transition. The Company is currently evaluating the impact of the pending adoption of the new standard on its financial statements and intends to adopt the standard as of January 1, 2024.

In June 2016, FASB issued ASU 2016-13, Financial Instruments – Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments, which replaces the incurred loss methodology with an expected loss methodology that is referred to as the current expected credit loss (“CECL”) methodology. The CECL model utilizes a lifetime expected credit loss measurement objective for the recognition of credit losses for loans and other receivables at the time the financial asset is originated or acquired. The expected credit losses are adjusted each period for changes in expected lifetime credit losses. This model replaces the multiple existing impairment models previously used under U.S. generally accepted accounting principles, which generally require that a loss be incurred before it is recognized. The new standard also applies to financial assets arising from revenue transactions such as contract assets and accounts receivables. For public business entities that meet the definition of an SEC filer, excluding entities eligible to be SRCs as defined by the SEC, ASU No. 2016-13 is effective for fiscal years beginning after December 15, 2019. All other entities, ASU No. 2016-13 is effective for fiscal years beginning after December 15, 2022. The Company is currently evaluating the effects of the adoption of ASU No. 2016-13 on its consolidated financial statements.

Item 7A. Quantitative and Qualitative Disclosures about Market Risk.

We are a smaller reporting company as defined by Rule 229.10(f)(1) and are not required to provide information under this item.

Item 8. Financial Statements and Supplementary Data.

Financial statements begin on page F-1 following this Report.

Index to Financial Statements

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM (PCAOB ID 89)

To the Board of Directors and
Stockholders of Ondas Holdings Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Ondas Holdings Inc. (the “Company”) as of December 31, 2021 and 2020, and the related consolidated statements of operations, stockholders’ equity, and cash flows for each of the years in the two year period ended December 31, 2021, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for each of the years in the two years period ended December 31, 2021, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matters communicated below are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

Business Combinations – Valuation of Acquired Intangible Assets

As described in Note 5 to the consolidated financial statements, on August 5, 2021, the Company acquired American Robotics, Inc. for purchase consideration of approximately $69.3 million. The Company accounted for the acquisition in accordance with ASC Topic 805, Business Combinations, which required the Company to exercise judgment and make estimates and assumptions based on available information regarding the fair values of intangible assets as of the date of the acquisition.

We identified the fair values of certain identifiable intangible assets, primarily developed technology, trademarks and FAA waiver, as critical audit matters. The principal considerations for our determination included the following: (i) changes in the key assumptions could have a significant impact on the fair value of the intangible assets acquired, (ii) subjectivity and judgment required to determine significant unobservable inputs and assumptions utilized by the Company in determining the fair value of the intangible assets, specifically projected revenue growth rates, expected cash flow, royalty rates and discount rates and (iii) the appropriateness of the use of various valuation models to determine the fair value of the developed technology, trademarks and FAA waiver acquired. Auditing these factors involved especially challenging and subjective auditor judgment due to the nature and extent of audit effort required to address the matters, including the extent of specialized skill or knowledge needed.

The primary procedures we performed to address this critical audit matter included:

/s/ Rosenberg Rich Baker Berman, P.A.

We served as the Company’s auditor since 2017.

Somerset, NJ

March 22, 2022 

ONDAS HOLDINGS INC.

CONSOLIDATED BALANCE SHEETS

 The accompanying footnotes are an integral part of these consolidated financial statements. 

ONDAS HOLDINGS INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

The accompanying footnotes are an integral part of these consolidated financial statements.

ONDAS HOLDINGS INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY